-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Stuart Henderson napisaE(a): > On 2006/09/11 13:28, Czes?aw Liebert wrote: >> pcibios0: PCI bus #0 is the last bus > > looks like you're missing some busses then, if you have other > PCI slots, you might try swapping cards around because some might > be attached to a working bus. If not or this is no help and you're > up to some hacking the following might help. If not it might save > someone else some time finding the information.. > >> pchb0 at pci0 dev 25 function 0 vendor "Compaq", unknown product 0x6010 rev >> 0x01 >> pchb1 at pci0 dev 26 function 0 vendor "Compaq", unknown product 0x6010 rev >> 0x01 >> pchb2 at pci0 dev 27 function 0 vendor "Compaq", unknown product 0x6010 rev >> 0x01 > > 0x6010 is a compaq hotplug pci bridge, the other busses must be > behind this. > > FreeBSD sets it up something like the serverworks (rcc) pchb with > busses attached (OpenBSD does this in /usr/src/sys/arch/i386/pci/pchb.c > e.g. around "case PCI_VENDOR_RCC") but bus number is on a different > config register on the compaq, 0xc8 instead of 0x44 - > http://fxr.watson.org/fxr/source/i386/pci/pci_bus.c#L280
i can't get to this point as i can't get openBSD installer to run. as for freeBSD i tried 6.0, 5.5, 6.1 and they all work just fine on this machine. but i am not rally into free, thus the question here on the list. any more ideas? Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFBV943VOnD+tUq3sRAmtHAJ0dTDDu9ORkcixgHYMNcUwleRMWrACfR7im KLRsOJdS35+h6MGnBOD3mp4= =BU+u -----END PGP SIGNATURE-----