On 2006/09/11 15:07, Czes??aw Liebert wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Stuart Henderson napisaE(a): > > On 2006/09/11 13:28, Czes?aw Liebert wrote: > >> pcibios0: PCI bus #0 is the last bus > > > > looks like you're missing some busses then, if you have other > > PCI slots, you might try swapping cards around because some might > > be attached to a working bus. If not or this is no help and you're > > up to some hacking the following might help. If not it might save > > someone else some time finding the information.. > > > >> pchb0 at pci0 dev 25 function 0 vendor "Compaq", unknown product 0x6010 > >> rev 0x01 > >> pchb1 at pci0 dev 26 function 0 vendor "Compaq", unknown product 0x6010 > >> rev 0x01 > >> pchb2 at pci0 dev 27 function 0 vendor "Compaq", unknown product 0x6010 > >> rev 0x01 > > > > 0x6010 is a compaq hotplug pci bridge, the other busses must be > > behind this. > > > > FreeBSD sets it up something like the serverworks (rcc) pchb with > > busses attached (OpenBSD does this in /usr/src/sys/arch/i386/pci/pchb.c > > e.g. around "case PCI_VENDOR_RCC") but bus number is on a different > > config register on the compaq, 0xc8 instead of 0x44 - > > http://fxr.watson.org/fxr/source/i386/pci/pci_bus.c#L280 > > i can't get to this point as i can't get openBSD installer to run. as > for freeBSD i tried 6.0, 5.5, 6.1 and they all work just fine on this > machine. but i am not rally into free, thus the question here on the list. > > any more ideas?
read my first paragraph where I mention swapping cards around.
