can you try a snapshot bsd.rd?
On Thu, Jul 19, 2007 at 11:33:34PM +0100, Nick Humphrey wrote:
> David Gwynne wrote:
> > On Thu, Jul 19, 2007 at 12:29:51PM +0100, Nick Humphrey wrote:
> >> I am having trouble with installing OpenBSD 4.1 on a new amd64 server
> >> with an Areca ARC-1210 raid card. When I boot from the 4.1 CD install
> >> media, everything seems fine up until it reaches" rd0: fixed, xxxx
> >> blocks" and then the system hangs. I have downloaded the latest amd64
> >> current snapshot from the mirrors and tried booting from that too - same
> >> result.
> >>
> >> System:
> >> - Gigabyte GA-M61PM-S2 (rev. 1.0) (BIOS Updated to latest F7 release)
> >> - Areca ARC-1210 SATA RAID PCI-Express (firmware updated to V1.43
> >> 2007-04-17)
> >> - 2 x 400GB SATA Disks
> >>
> >> I have setup RAID 1 mirror of the two disks in the RAID BIOS. (Areca
> >> card and drives detected by and usable in Linux and Windows XP). Without
> >> the ARC-1210 card installed and the disks wired to the on-board SATA
> >> controller everything works fine (i.e. I am able to install OpenBSD). I
> >> have tried disabling on-board LAN and on-board SATA in the BIOS. I have
> >> also tried enabling ACPI at boot time with ( -c, UKC> enable acpi, quit
> >> ) which produces same result. In addition I have tried booting with the
> >> i386 release media, and experienced exactly the same problem.
> >
> > can you show me a dmesg from this box with acpi enabled?
> >
> > dlg
> >
>
> <snip>
>
> David,
>
> Please find below dmesg from 4.1-RELEASE with acpi enabled.
>
> Kind regards,
>
> Nick
>
>
> boot> -c
> booting cd0a:/4.1/amd64/bsd.rd: 2169728+438535+2270160+0+330160
> [80+220056+135431]=0x94f9a0
> entry point at 0x1001e0 [7205c766, 34000004, 24448b12,
> 2840a304]??Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2007 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 4.1 (RAMDISK_CD) #1054: Sat Mar 10 19:32:06 MST 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 2079911936 (2031164K)
> avail mem = 1778188288 (1736512K)
> using 22937 buffers containing 208199680 bytes (203320K) of memory
> User Kernel Config
> UKC> enable acpi
> 136 acpi0 enabled
> UKC> quit
> Continuing...
> mainbus0 (root)
> acpi0 at mainbus0: rev 0
> acpi0: tables DSDT FACP SSDT HPET MCFG APIC
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (HUB0)
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+, 2612.33 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: PowerNow! K8 2612 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1
> "NVIDIA MCP61 Memory" rev 0xa1 at pci0 dev 0 function 0 not configured
> "NVIDIA MCP61 ISA" rev 0xa2 at pci0 dev 1 function 0 not configured
> "NVIDIA MCP61 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
> "NVIDIA MCP61 Memory" rev 0xa2 at pci0 dev 1 function 2 not configured
> ohci0 at pci0 dev 2 function 0 "NVIDIA MCP61 USB" rev 0xa2: irq 10,
> version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 10 ports with 10 removable, self powered
> ehci0 at pci0 dev 2 function 1 "NVIDIA MPC61 USB" rev 0xa2: irq 11
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1
> uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub1: 10 ports with 10 removable, self powered
> ppb0 at pci0 dev 4 function 0 "NVIDIA MCP61" rev 0xa1
> pci1 at ppb0 bus 1
> skc0 at pci1 dev 7 function 0 "D-Link Systems DGE-530T B1" rev 0x11,
> Yukon Lite (0x9): irq 10
> sk0 at skc0 port A, address 00:15:e9:aa:d3:34
> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
> pciide0 at pci0 dev 6 function 0 "NVIDIA MCP61 IDE" rev 0xa2: DMA,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.16> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ppb1 at pci0 dev 9 function 0 "NVIDIA MCP61 PCIE" rev 0xa2
> pci2 at ppb1 bus 2
> ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
> pci3 at ppb2 bus 3
> arc0 at pci3 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 11
> arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17
> scsibus1 at arc0: 16 targets
> sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3
> 0/direct fixed
> sd0: 381469MB, 58128 cyl, 28 head, 480 sec, 512 bytes/sec, 781249536 sec
> total
> ppb3 at pci2 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
> pci4 at ppb3 bus 4
> vga1 at pci0 dev 13 function 0 "NVIDIA GeForce 6100 nForce 430" rev 0xa2
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> rd0: fixed, 3584 blocks
>
> --------------------------------------------------------------
>
> End.
