Re: arc0: unable to query firmware for sensor info

Thu, 27 Sep 2007 15:41:24 -0700 

On 27/09/2007, at 8:06 PM, Stephan A. Rickauer wrote:
A new server shippped by a local vendor fails to boot bsd.mp, with and without acpi enabled (amd64, 4.2). Without acpi it will reboot directly after mounting the root device. With acpi enabled it will hang with "arc0: unable to query firmware for sensor info". Uniprocessor kernels would boot fine, both acpi and without. Pls. find dmesgs of those as well as more info below.
I'm pretty sure that message from arc is a result of interrupts not being hooked up correctly.
also, arc doesnt hang after printing that message, it gives control back to the rest of the kernel. presumably the kernel is hanging while waiting for io on the disk to work, but of course, the disk is on arc and interrupts arent wired up to it correctly so just blocks. 

dlg



# cat 4.2-bsd-noacpi.dmesg
OpenBSD 4.2 (GENERIC) #0: Thu Sep 27 12:10:25 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ GENERIC 
real mem = 3757588480 (3583MB)
avail mem = 3636060160 (3467MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)
bios0: vendor American Megatrends Inc. version "WTF2V028" date 01/24/2007 
acpi at mainbus0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.24 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0: disabled to avoid ipmi0 interactions
iic1 at nviic0: disabled to avoid ipmi0 interactions
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 9, version 1.0, legacy support 
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility 
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SN-S082D, SS03> SCSI0 5/cdrom removable 
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide2: using irq 10 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 7
vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 7 function 0 not configured 
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 6
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 7, address 00:d0:68:12:0b:71 
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5, address 00:d0:68:12:0b:70 
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci6 at ppb5 bus 3
arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 7
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17
scsibus1 at arc0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3 0/direct fixed sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec, 312499712 sec total 
ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci7 at ppb6 bus 2
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b


# cat 4.2-bsd-acpi.dmesg
OpenBSD 4.2 (GENERIC) #0: Thu Sep 27 12:10:25 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ GENERIC 
real mem = 3757588480 (3583MB)
avail mem = 3636060160 (3467MB)
User Kernel Config
UKC> enable acou\^H \^H\^H \^Hpi
263 acpi0 enabled
UKC> exit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)
bios0: vendor American Megatrends Inc. version "WTF2V028" date 01/24/2007 
acpi0 at mainbus0: rev 2
acpi0: tables DSDT FACP APIC OEMB SRAT
acpitimer at acpi0 not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 0 (PCIB)
acpiprt3 at acpi0: bus 0 (POGA)
acpiprt4 at acpi0: bus 0 (POGB)
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpicpu at acpi0 not configured
acpibtn at acpi0 not configured
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.26 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0: disabled to avoid ipmi0 interactions
iic1 at nviic0: disabled to avoid ipmi0 interactions
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 5, version 1.0, legacy support 
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility 
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SN-S082D, SS03> SCSI0 5/cdrom removable 
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide2: using irq 7 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 7
vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"TI TSB43AB22 FireWire" rev 0x00 at pci1 dev 7 function 0 not configured 
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 6
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 7, address 00:d0:68:12:0b:71 
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): irq 5, address 00:d0:68:12:0b:70 
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci6 at ppb5 bus 3
arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: irq 7
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17
scsibus1 at arc0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3 0/direct fixed sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec, 312499712 sec total 
ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci7 at ppb6 bus 2
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a swap on sd0b dump on sd0b
I also followed Kenneth's suggestion [1] and recompiled an mp kernel with fully enabled acpi. But that would not change anything. A further look into the BIOS reveales scary APCI options, playing around with them without having a clue didn't help either. What I didn't do so far is to try a -current kernel, simply because I don't know whether that improves the scenario at all. May be worth a try if someone knows of heavy changes in the acpi sector. 

Here's the dmesg of the failing bsd.mp, 4.2 with acpi:


OpenBSD 4.2 (GENERIC.MP) #1: Thu Sep 27 12:59:32 CEST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ GENERIC.MP 
real mem = 3757588480 (3583MB)
avail mem = 3635908608 (3467MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x99c00 (84 entries)
bios0: vendor American Megatrends Inc. version "WTF2V028" date 01/24/2007 
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC OEMB SRAT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2212, 2000.23 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual-Core AMD Opteron(tm) Processor 2212, 2000.00 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE3 6,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG, 3DNOW2,3DNOW cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative 
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 24 pins
acpimadt0: unknown apic structure type ff
acpimadt0: unknown apic structure type ff
acpimadt0: unknown apic structure type ff
acpi device at acpi0 from table OEMB not configured
acpi device at acpi0 from table SRAT not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 7 (P0P1)
acpiprt2 at acpi0: bus 0 (PCIB)
acpiprt3 at acpi0: bus 0 (POGA)
acpiprt3: no apic found for irq 73
acpiprt3: no apic found for irq 74
acpiprt3: no apic found for irq 75
acpiprt3: no apic found for irq 72
acpiprt3: no apic found for irq 75
acpiprt4 at acpi0: bus 0 (POGB)
acpiprt4: no apic found for irq 80
acpiprt4: no apic found for irq 81
acpiprt4: no apic found for irq 82
acpiprt4: no apic found for irq 79
acpiprt4: no apic found for irq 81
acpiprt4: no apic found for irq 82
acpiprt4: no apic found for irq 79
acpiprt4: no apic found for irq 80
acpiprt4: no apic found for irq 82
acpiprt4: no apic found for irq 79
acpiprt4: no apic found for irq 80
acpiprt4: no apic found for irq 81
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0: disabled to avoid ipmi0 interactions
iic1 at nviic0: disabled to avoid ipmi0 interactions
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility 
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SN-S082D, SS03> SCSI0 5/cdrom removable 
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide1: using apic 4 int 15 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xa3: DMA
pciide2: using apic 4 int 15 (irq 10) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 7
vga1 at pci1 dev 6 function 0 "XGI Technology Volari Z7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 6
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 5
bge0 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 5 (irq 5), address 00:d0:68:12:0b:71 
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
bge1 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 15 (irq 7), address 00:d0:68:12:0b:70 
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
ppb5 at pci5 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci6 at ppb5 bus 3
arc0 at pci6 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 4 int 15 (irq 5) 
arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.43 2007-4-17
scsibus1 at arc0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <Areca, ARC-1210-VOL#00, R001> SCSI3 0/direct fixed sd0: 152587MB, 54253 cyl, 12 head, 480 sec, 512 bytes/sec, 312499712 sec total 
ppb6 at pci5 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci7 at ppb6 bus 2
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
arc0: unable to query firmware for sensor info
Any help, of course, is greatly appreciated. The server is not productive yet, so I can help providing all data that may be required. SSH login is also possible. Thanks! 


[1] http://marc.info/?l=openbsd-misc&m=118148605315920&w=2

--

   Stephan A. Rickauer

   -----------------------------------------------------------
   Institute of Neuroinformatics         Tel  +41 44 635 30 50
   University / ETH Zurich               Sec  +41 44 635 30 52
   Winterthurerstrasse 190               Fax  +41 44 635 30 53
   CH-8057 Zurich                        Web  www.ini.unizh.ch

   RSA public key:  https://www.ini.uzh.ch/~stephan/pubkey.asc
   -----------------------------------------------------------

Reply via email to