Hello all.
Due to different reasons I bought MS Wireless Desktop (keyboard + mouse).
While keyboard works fine, mouse produces headache. I'll skip simptoms,
going straight to information gathered.
I tried to used new mouse both alone and with Logitech UltraX Optical
in pair. Logitech works OK in both cases (it suffers from, err,
"hardware problems":), which were the reasons to buy new mouse).
IntelliMouse going wrong in both cases too.
Snip from dmesg (full version later):
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0 "Microsoft Microsoft
Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1 "Microsoft Microsoft
Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 3
uhidev2: iclass 3/0
uhidev2: 23 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev2 reportid 5: input=3, output=0, feature=0
uhid5 at uhidev2 reportid 6: input=0, output=0, feature=1
ums1 at uhidev2 reportid 17: 5 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhid6 at uhidev2 reportid 18: input=0, output=0, feature=1
uhid7 at uhidev2 reportid 19: input=1, output=0, feature=0
uhid8 at uhidev2 reportid 20: input=1, output=0, feature=0
uhid9 at uhidev2 reportid 21: input=3, output=0, feature=0
uhid10 at uhidev2 reportid 23: input=0, output=0, feature=1
xev(1) output for mouse clicks are different: while Logitech
produces single "mouse down" and "mouse release" events as
it should, IntelliMouse produces "mouse down" and "mouse up"
on each move too, which yields many strange things. I can send
exact logs (enter window, mouse move, mouse down, mouse move,
mouse up, mouse move, exit window) if anyone is interested in
them.
One more thing: xmseconfig(1) tells me that X server doesn't
handle "Protocol" option in xorg.conf, always setting it to
"microsoft" instead of "wsmouse" (or, at least, "intellimouse",
which is compatible, instead of "microsoft"). After reverting
protocol to something more closer to reality, some bugs
disappear, but xev(1) still says there are "mouse down" and
"mouse release" events on each move with pressed button.
Even more: when I try to move objects like scrollbars by
dragging using any mouse button, they began to move up, like
mouse wheel tell is being scrolled.
But mouse wheel doesn't work. At all. It worked many days,
and some days ago it sopped working. I thought that was due
to "hardware problems" (some juice over it) with Logitech
mouse, and I went to buy new mouse... And now I'm stuck.
It's more likely OpenBSD-related problem because all is OK on
a fresh (Mandriva 2008.0) Linux distribution which I pulled in.
Today I'm going to test this mouse on another OpenBSD machine,
which is CURRENT too. If I'll find something more than I'll
post it here, of course.
Thank you for any tips.
--
Best wishes,
Vadim Jukov
OpenBSD 4.2-current (GENERIC) #431: Sun Oct 14 22:00:04 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Sempron(tm) Processor 2600+ ("AuthenticAMD" 686-class, 128KB L2
cache) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: AMD erratum 89 present, BIOS upgrade may be required
real mem = 1072459776 (1022MB)
avail mem = 1029238784 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/28/05, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xf0530 (55 entries)
bios0: vendor American Megatrends Inc. version "1008.013 " date
06/28/2005
bios0: ASUSTeK Computer Inc. K8V-MX
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf58a0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xcd000/0x2000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8M800 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M800 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M800 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M800 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8M800 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon 9600 Pro" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9600 Pro Sec" rev 0x00 at pci1 dev 0 function 1 not configured
"VIA VT6306 FireWire" rev 0x80 at pci0 dev 7 function 0 not configured
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:80:48:44:86:c5
rlphy0 at rl0 phy 0: RTL internal PHY
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-2510A, 2.15> SCSI0 5/cdrom
removable
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
wd0 at pciide1 channel 1 drive 0: <QUANTUM FIREBALL EL5.1A>
wd0: 16-sector PIO, LBA, 4892MB, 10018890 sectors
wd1 at pciide1 channel 1 drive 1: <ST3120022A>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11, address
00:13:d4:37:d4:38
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff65 netmask ff65 ttymask ffe7
pctr: user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub1 port 2 configuration 1 interface 0 "Microsoft Microsoft
Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub1 port 2 configuration 1 interface 1 "Microsoft Microsoft
Wireless Optical Desktop\M-. 2.10" rev 2.00/0.41 addr 3
uhidev2: iclass 3/0
uhidev2: 23 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=2, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid3 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev2 reportid 5: input=3, output=0, feature=0
uhid5 at uhidev2 reportid 6: input=0, output=0, feature=1
ums1 at uhidev2 reportid 17: 5 buttons and Z dir.
wsmouse1 at ums1 mux 0
uhid6 at uhidev2 reportid 18: input=0, output=0, feature=1
uhid7 at uhidev2 reportid 19: input=1, output=0, feature=0
uhid8 at uhidev2 reportid 20: input=1, output=0, feature=0
uhid9 at uhidev2 reportid 21: input=3, output=0, feature=0
uhid10 at uhidev2 reportid 23: input=0, output=0, feature=1
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: wd1 matches BIOS drive 0x80
root on wd1a swap on wd1b dump on wd1b
wsdisplay0: screen 10 added (80x25bf, vt100 emulation)
wsdisplay0: screen 11 added (80x25bf, vt100 emulation)
