Raimo Niskanen wrote: >> On Wed, Aug 13, 2008 at 12:04:26PM +0200, Christophe Rioux wrote: >>> Same error with the install44.iso >>> => No disk found. >> >> Check bios settings if there is some way to configure the disk >> controller in legacy mode or something like that.
Alexander Sabourenkov wrote: >I just solved this very problem with the opposite actions: disable all >"legacy" and "compatibility" stuff and enable AHCI instead. If found something, but this is not the result I wanted: BIOS: Phoenix cME Pro - natural module: SATA (instead of AUTO) - SATA RAID: disable - Harddisk configuration: 32 bits I/O: DISABLE (instead of ENABLE) -> IDE 32 Bits compatibility) => that means I could install the 4.3 (or 4.4-beta) on the server, but If I try to reconnect the SATA RAID, the system boots and hang after the boot with the message "Boot device:". With hang, I mean, the keyboard doesn't work any more I'll try to get the dmesg out of the server Regards