OpenBSD 4.3 (RAMDISK_CD) #645: Wed Mar 12 11:31:03 MDT 2008
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz ("GenuineIntel" 686-class) 1.61
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLU
SH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem = 534974464 (510MB)
avail mem = 511098880 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfdc20,
SMBIOS rev. 2.5 @ 0xdc010 (43 entries)
bios0: vendor HP version "O22" date 07/03/2008
bios0: HP ProLiant DL120 G5
acpi0 at bios0: rev 2, can't enable ACPI
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x5000 0xce000/0x1a00
0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29f0 rev
0x01
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x29f1 rev
0x01: irq 5
pci1 at ppb0 bus 1
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: irq 5
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: irq 10
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: irq 3
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: irq 3
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: irq 5
pci2 at ppb1 bus 5
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: irq 5
pci3 at ppb2 bus 13
vga1 at pci3 dev 0 function 0 "Matrox MGA G200e (ServerEngines)" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: irq 10
pci4 at ppb3 bus 14
bge0 at pci4 dev 0 function 0 "Broadcom BCM5722" rev 0x00, BCM5755 C0
(0xa200): irq 10, address 00:1f:29:0e:48:e4
brgphy0 at bge0 phy 1: BCM5722 10/100/1000baseT PHY, rev. 0
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 5
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 3
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 5
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 17
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801H RAID" rev 0x02: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using irq 10 for native-PCI interrupt
"Intel 82801I SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
pciide1 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel
0 wired to native-PCI, channel 1 wired to native-PCI
pciide1: using irq 3 for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, DV-28E-V, C.AB> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
uhidev0 at uhub5 port 2 configuration 1 interface 0 "ServerEngines SE USB
Device" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub5 port 2 configuration 1 interface 1 "ServerEngines SE USB
Device" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1
uhid at uhidev1 not configured
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 3 configuration 1 interface 0 "Kingston DataTraveler
2.0" rev 2.00/1.10 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
0/direct removable
sd0: 954MB, 121 cyl, 255 head, 63 sec, 512 bytes/sec, 1953792 sec total
-----Message d'origine-----
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de
Stuart Henderson
Envoyi : mercredi 13 ao{t 2008 10:35
@ : misc@openbsd.org
Objet : Re: Installation OpenBsd under HP DL120
On 2008-08-13, Christophe Rioux <[EMAIL PROTECTED]> wrote:
> I just try to install OpenBSD on a HP DL120 Server (big PC in Rack form).
> But I have the following issues:
>
> * version 3.9: can't boot: no compatible PCI ICU found
>
>=> no problem, let's try with the new version (4.3)
>
> * version 4.3: disk/disk controler non found => no installation possible
>
> Can somebody help me to continue. I may have the drivers (I have a
> diagnotics DVD from HP under Linux, so I may have the drivers), but I
don't
> know how to proceed.
If you boot from serial console, or with a USB stick connected,
then you can save the dmesg and show us what hardware is in the
machine.
