Hi all, I noticed some problems with radeondrm since a few days. I have an IBM T43 (dmesg following) and when I exit X, my system crashes. Since it is a laptop without serial port, I can not give further details.
I contacted oga@ about this issue but it's impossible to diagnose without more details than a dmesg... So I send this email to misc to see if people are in the same situation but with a built-in serial port in the machine. Thanks, OpenBSD 4.4-current (GENERIC) #35: Fri Nov 28 14:47:51 CET 2008 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 real mem = 1005023232 (958MB) avail mem = 963420160 (918MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries) bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006 bios0: IBM 2668WEV apm0 at bios0: Power Management spec V1.2 apm0: battery life expectancy 99% apm0: AC on, battery charge high acpi at bios0 function 0x0 not configured pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) pcibios0: PCI bus #12 is the last bus bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1600 0xd1800/0x1000 0xdc000/0x4000! 0xe0000/0x10000 cpu0 at mainbus0: (uniprocessor) cpu0: Enhanced SpeedStep 1867 MHz (1308 mV): speeds: 1867, 1600, 1333, 1067, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11 pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1 drm0 at radeondrm0 ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11 pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1 (0x4101): irq 11, address 00:11:25:d3:54:2c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 11 pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci4 at ppb3 bus 11 cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11 iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11, address 00:12:f0:dc:3d:69 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11, ICH6 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <HTS541080G9AT00> wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets, initiator 7 cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-822S, 1.61> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 11 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt2 at isa0 port 0x3bc/4: polled aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask efe5 netmask efe5 ttymask ffff mtrr: Pentium Pro MTRR support ugen0 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/22.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 8 buttons, Z dir wsmouse1 at ums0 mux 0 softraid0 at root root on wd0a swap on wd0b dump on wd0b WARNING: / was not properly unmounted iwi0: XXX too many rates (count=13, last=108) kqemu: kqemu version 0x00010300 loaded, max locked mem=490732kB DDB symbols added: 331296 bytes auich0: measured ac97 link rate at 48005 Hz, will use 48000 Hz radeondrm0: Setting GART location based on new memory map radeondrm0: Loading R300 Microcode radeondrm0: writeback test succeeded in 1 usecs umass0 at uhub0 port 3 configuration 1 interface 0 "Maxtor OneTouch" rev 2.00/2.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Maxtor, OneTouch, 0201> SCSI0 0/direct fixed sd0: 194480MB, 512 bytes/sec, 398295040 sec total -- Mattieu Baptiste "/earth is 102% full ... please delete anyone you can."