Hello m...@. Subj:
Trying to boot from Secondary Compact Flash ...
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 apm pci mem[635K 1022M a20=on]
7156348+1055080 [52+363840+348188]=0x882ae8 >> OpenBSD/i386 BOOT 3.02
entry point at 0x200120
com0: 9600 baud
[ using 712452 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.7-current (GENERIC) #603: Mon Apr 12 16:28:26 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073115136 (1023MB)
avail mem = 1029746688 (982MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/20/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xfbbf0 (71 entries)
bios0: vendor American Megatrends Inc. version "080012" date 06/20/2007
bios0: JUNIPER NETWORKS SHASTA_MBD_865
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC OEMB8b800) at pcib_callback+0x48
acpi0: wakeup devices P0P4(S4) MC97(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
EUSB(S4) GBEN(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat0) at config_attach+0x105
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHzay+0x3a
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)678,d0203001) at isapnp_find+0x99
acpiprt1 at acpi0: bus 1 (P0P4)d0a84770,d08a8fdc) at isapnp_match+0x83
acpicpu0 at acpi0d1cc1900,4,1) at isascan+0xf9
acpibtn0 at acpi0: SLPBcc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf
acpibtn1 at acpi0: PWRBd08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x0248
"Intel 82865G Video" rev 0x02 at pci0 dev 2 function 0 not configuredonfig_proc
ppb0 at pci0 dev 3 function 0 "Intel 82865G CSA" rev 0x02
pci1 at ppb0 bus 2afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105
em0 at pci1 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: apic 1 int
18 (irq 5)
em0: The EEPROM Checksum Is Not Valid(0,d08a6714,0,0,0) at config_attach+0xfd
em0: Unable to initialize the hardware04d01ba) at config_rootfound+0x27
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19
(irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 18
(irq 5)
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16
(irq 5)
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2
pci2 at ppb1 bus 1
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int
20 (irq 5),
address ff:ff:ff:ff:ff:ff
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
"Cavium NITROX Lite" rev 0x00 at pci2 dev 15 function 0 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
wd0 at pciide0 channel 1 drive 0: <>
wd0: 1-sector PIO, LBA, 967MB, 1980720 sectors
wd0(pciide0:1:0): using PIO mode 4, DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int
17 (irq 5)
iic0 at ichiic0
iic0: addr 0x18 0f=18 1e=18 2d=18 3c=18 4b=18 5a=18 69=18 78=f8 87=f8 96=f8
a5=f8 b4=f3 c3=fa d2=00 e1=00 f0=18 words 00=ffff 01=ffff 02=ffff 03=ffff
04=ffff 05=ffff 06=ffff 07=ffff
adt0 at iic0 addr 0x2d: emc6d100 rev 0x6a
iic0: addr 0x2e 20=73 21=7c 22=ba 23=c7 24=be 25=24 26=1f 27=18 28=6f 29=12
2a=a3 2b=12 2c=2f 2d=09 2e=ff 2f=ff 30=40 31=40 32=40 3e=01 3f=69 40=05 43=0d
45=ff 47=ff 49=ff 4b=ff 4d=ff 4e=81 4f=7f 50=81 51=7f 52=81 53=7f 54=ff 55=ff
56=ff 57=ff 58=ff 59=ff 5a=ff 5b=ff 5c=22 5d=02 5e=42 5f=74 60=74 61=74 62=ef
63=ff 64=40 65=40 66=40 67=3a 68=23 69=2e 6a=44 6b=38 6c=38 6e=40 70=23 71=1f
72=17 73=be 75=07 7b=40 7c=4d 7d=43 7e=6f 7f=55 words 00=00ff 01=00ff 02=00ff
03=00ff 04=00ff 05=00ff 06=00ff 07=00ff
spdmem0 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL3.0
spdmem1 at iic0 addr 0x53: 512MB DDR SDRAM non-parity PC3200CL3.0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci3: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
Stopped at lapic_delay+0x3a: cmpl %esi,%edi
lapic_delay(fa,223,0) at lapic_delay+0x3a
isapnp_findcard(d0a84670,a79,0,7) at isapnp_findcard+0xba
isapnp_find(d0a84670,0,10,d0a84678,d0203001) at isapnp_find+0x99
isapnp_match(d1cc1b00,d1cc1900,d0a84770,d08a8fdc) at isapnp_match+0x83
isascan(d1cc1b00,d1cc1900,4,1) at isascan+0xf9
config_scan(d06220f4,d1cc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf
config_attach(d1ca4080,d08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x
fd
pcib_callback(d1ca4080,2,1f,7,d1c8b800) at pcib_callback+0x48
config_process_deferred_children(d1c8b800,0,0,d1c8afc0,d1c89ec0) at config_proc
ess_deferred_children+0x59
config_attach(d1c8afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105
ddb> trace
lapic_delay(fa,223,0) at lapic_delay+0x3a
isapnp_findcard(d0a84670,a79,0,7) at isapnp_findcard+0xba
isapnp_find(d0a84670,0,10,d0a84678,d0203001) at isapnp_find+0x99
isapnp_match(d1cc1b00,d1cc1900,d0a84770,d08a8fdc) at isapnp_match+0x83
isascan(d1cc1b00,d1cc1900,4,1) at isascan+0xf9
config_scan(d06220f4,d1cc1b00,d0a84db0,d1ca4080,d1ca9000) at config_scan+0xaf
config_attach(d1ca4080,d08a8280,d0a84db0,d061f134,d07d5557) at config_attach+0x
fd
pcib_callback(d1ca4080,2,1f,7,d1c8b800) at pcib_callback+0x48
config_process_deferred_children(d1c8b800,0,0,d1c8afc0,d1c89ec0) at config_proc
ess_deferred_children+0x59
config_attach(d1c8afc0,d08a6738,d0a84e70,d0502450) at config_attach+0x105
mainbus_attach(0,d1c8afc0,0,dbe35000,d0a83334) at mainbus_attach+0x1f1
config_attach(0,d08a6714,0,0,0) at config_attach+0xfd
config_rootfound(d07c37c2,0,d0a84f38,d04d01ba) at config_rootfound+0x27
cpu_configure(d09d2060,1,3,0,2) at cpu_configure+0x29
main(0,0,0,0,0) at main+0x3a3
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x80200 swapper
ddb>
; Do anyone have an experience or success stories with such HW and OpenBSD? Thx.
