Since a few people asked in private email, here is the dmesg, including hacked bootloader cruft. This is a few months old, as I haven't had time to play.
If anyone is interested in donating any x86-based, Compact Flash-enabled Cisco appliances (ASA 55xx firewalls, 42xx IDS/IPS, etc), let me (j...@openbsd) or Theo know. There are a couple of devices that will need some time to have drivers witten (i.e. - the Marvell switch-on-a-chip on the ASA 5505, etc) And, no, I haven't updated want.html as this was a personal hack until now. It would be cruel and perverse to run pf and OpenBGPD on Cisco gear in Theo's rack, so please donate until it hurts. --J Booting system, please wait... CISCO SYSTEMS Embedded BIOS Version 1.0(11)2 01/25/06 13:21:26.17 Low Memory: 631 KB High Memory: 2048 MB PCI Device Table. Bus Dev Func VendID DevID Class Irq 00 00 00 8086 2578 Host Bridge 00 01 00 8086 2579 PCI-to-PCI Bridge 00 03 00 8086 257B PCI-to-PCI Bridge 00 1C 00 8086 25AE PCI-to-PCI Bridge 00 1D 00 8086 25A9 Serial Bus 11 00 1D 01 8086 25AA Serial Bus 10 00 1D 04 8086 25AB System 00 1D 05 8086 25AC IRQ Controller 00 1D 07 8086 25AD Serial Bus 9 00 1E 00 8086 244E PCI-to-PCI Bridge 00 1F 00 8086 25A1 ISA Bridge 00 1F 02 8086 25A3 IDE Controller 11 00 1F 03 8086 25A4 Serial Bus 5 00 1F 05 8086 25A6 Audio 5 02 01 00 8086 1075 Ethernet 11 03 01 00 177D 0003 Encrypt/Decrypt 9 03 02 00 8086 1079 Ethernet 9 03 02 01 8086 1079 Ethernet 9 03 03 00 8086 1079 Ethernet 9 03 03 01 8086 1079 Ethernet 9 04 02 00 8086 1209 Ethernet 11 04 03 00 8086 1209 Ethernet 5 Evaluating BIOS Options ... Launch BIOS Extension to setup ROMMON Cisco Systems ROMMON Version (1.0(11)2) #0: Thu Jan 26 10:43:08 PST 2006 Platform IPS-4240-K9 Use BREAK or ESC to interrupt boot. Use SPACE to begin boot immediately. Launching BootLoader... Boot configuration file contains 3 entries. GNU GRUB version 1.0(11)2 (631K lower / 2096128K upper memory) ------------------------------------------------------------------- 0: OpenBSD 1: Cisco IPS 2: Cisco IPS Recovery ------------------------------------------------------------------- Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. Highlighted entry is 0: Booting 'OpenBSD' root (hd1,a) Filesystem type is ffs, partition type 0xa6 makeactive Booting... Loading... probing: pc0 com0 com1apm_check: 1, 0, 8600 pci[V0.5, 1 0x0 4] mem(0x15[E820] apmremove (0))[631K 2047M a20=on] disk: ; ;getinfo: try #8, 0x80, 0x4c68c getinfo: got #8 disk 0x80: 65504,15,63 getinfo: try #41, 0x80 getinfo: got #41 disk 0x80: 0x7 hd0+ found partition 0: type 131 (0x83) offset 63 (0x3f) found partition 1: type 131 (0x83) offset 145152 (0x23700) found partition 2: type 131 (0x83) offset 497952 (0x79920) found partition 3: type 131 (0x83) offset 498960 (0x79d10) *getinfo: try #8, 0x81, 0x4c854 getinfo: got #8 disk 0x81: 64759,15,63 getinfo: try #41, 0x81 getinfo: got #41 disk 0x81: 0x7 hd1+ found partition 3: type 166 (0xa6) offset 32 (0x20) loading disklabel @ 33 >> OpenBSD/i386 BOOT 3.02 devopen: BIOS: hd1a:/etc/boot.conf BIOS geometry: heads=16, s/t=63; EDD=7 switching console to com0 >> OpenBSD/i386 BOOT 3.02 boot> [ using 691200 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.6-current (GENERIC) #0: Wed Nov 25 17:01:00 MST 2009 r...@embedded:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.00GHz ("GenuineIntel" 686-class) 2.01 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH, DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 2147045376 (2047MB) avail mem = 2071662592 (1975MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 01/25/06, BIOS32 rev. 0 @ 0xff080 mpbios0 at bios0: Intel MP Specification 1.1 cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 100MHz mpbios0: bus 0 is type PCI mpbios0: bus 1 is type PCI mpbios0: bus 2 is type PCI mpbios0: bus 3 is type PCI mpbios0: bus 4 is type PCI mpbios0: bus 5 is type ISA ioapic0 at mainbus0: apid 14 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 13 pa 0xfec10000, version 20, 24 pins pcibios0 at bios0: rev 2.1 @ 0xff0f0/0x600 pcibios0: PCI BIOS has 11 Interrupt Routing table entries pcibios0: PCI Exclusive IRQs: 5 9 10 11 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 6300ESB LPC" rev 0x00) pcibios0: PCI bus #4 is the last bus bios0: ROM list: 0xc0000/0x1800 0xc1800/0x1800 pci0 at mainbus0 bus 0: configuration mode 1 (bios) bridge mem address conflict 0xf8100000/0x100000 bridge mem address conflict 0xf8200000/0x100000 bridge mem address conflict 0xf8300000/0x100000 pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02 intelagp0 at pchb0 agp0 at intelagp0: aperture at 0xf8000000, size 0x400000 ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02 pci1 at ppb0 bus 1 ppb1 at pci0 dev 3 function 0 "Intel 82875P CSA" rev 0x02 pci2 at ppb1 bus 2 mem address conflict 0x80020000/0x20000 mem address conflict 0x80040000/0x20000 em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547GI)" rev 0x00: apic 14 int 18 (irq 11), address 00:00:00:01:00:02 ppb2 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 pci3 at ppb2 bus 3 mem address conflict 0x80060000/0x20000 mem address conflict 0x80080000/0x20000 mem address conflict 0x800a0000/0x20000 mem address conflict 0x800c0000/0x20000 "Cavium NITROX Lite" rev 0x00 at pci3 dev 1 function 0 not configured em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 13 int 0 (irq 9), address 00:0a:b8:61:60:29 em2 at pci3 dev 2 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 13 int 1 (irq 9), address 00:0a:b8:61:60:28 em3 at pci3 dev 3 function 0 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 13 int 2 (irq 9), address 00:0a:b8:61:60:27 em4 at pci3 dev 3 function 1 "Intel PRO/1000MT (82546GB)" rev 0x03: apic 13 int 3 (irq 9), address 00:0a:b8:61:60:26 uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 14 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 14 int 19 (irq 10) "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 14 int 23 (irq 9) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a pci4 at ppb3 bus 4 mem address conflict 0x80001000/0x1000 mem address conflict 0x800e0000/0x20000 mem address conflict 0x80002000/0x1000 mem address conflict 0x80100000/0x20000 fxp0 at pci4 dev 2 function 0 "Intel 82559ER" rev 0x10, i82551: apic 14 int 16 (irq 11), address 00:0a:b8:61:60:25 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 fxp1 at pci4 dev 3 function 0 "Intel 82559ER" rev 0x10, i82551: apic 14 int 17 (irq 5), address 00:00:00:01:00:01 inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4 ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 2 "Intel 6300ESB SATA" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <STI Flash 7.2.0> wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors wd1 at pciide0 channel 0 drive 1: <Hitachi Flash Card> wd1: 1-sector PIO, LBA, 122MB, 250368 sectors wd0(pciide0:0:0): using PIO mode 4 wd1(pciide0:0:1): using PIO mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: apic 14 int 17 (irq 5) iic0 at ichiic0 auich0 at pci0 dev 31 function 5 "Intel 6300ESB AC97" rev 0x02: can't map codec i/o space usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root root on wd1a swap on wd1b dump on wd1b