Actually, never mind, this is a server error with
anoncvs.usa.openbsd.org by the look of it.


On Mon, Apr 19, 2010 at 07:02:22PM +0100, Nicholas Marriott wrote:
> What arch are you using?
> 
> What do:
> 
> $ which cvs
> $ ldd `which cvs`
> 
> show?
> 
> What do ktrace cvs/kdump show?
> 
> 
> On Mon, Apr 19, 2010 at 12:38:55PM -0500, Bryan wrote:
> > On Mon, Apr 19, 2010 at 12:30, Bryan <bra...@gmail.com> wrote:
> > > On Mon, Apr 19, 2010 at 11:40, Bryan <bra...@gmail.com> wrote:
> > >> On Mon, Apr 19, 2010 at 11:18, Markus Lude <markus.l...@gmx.de> wrote:
> > >>> On Mon, Apr 19, 2010 at 10:45:45AM -0500, Bryan wrote:
> > >>>> I am running the latest snapshot from ftp.openbsd.org. B Install
> > >>>> appears fine, and I've had no issues until I tried to pull the latest
> > >>>> from CVS.
> > >>>>
> > >>>>
> > >>>> r...@openbsd-v0 /usr # CVS -d$CVSROOT checkout -P xenocara
> > >>>
> > >>> Is this the command you have tried? "CVS"? Or some alias? What about
> > using
> > >>> "cvs"?
> > >>>
> > >>
> > >> sorry, "cvs" not "CVS"... no alias. B I use the commands from the FAQ...
> > >>
> > >> cd /usr/src
> > >> export CVSROOT=ftp://ftp3.usa.openbsd.org:/cvs
> > >> cvs -d$CVSROOT up -Pd
> > >>
> > >
> > > hold on, I'm not an idiot... B I meant:
> > >
> > > anon...@anoncvs.usa.openbsd.org:/cvs
> > >
> > >>>> cvs: can't load library 'libc.so.51.0'
> > >>>>
> > >>>> Doing a global find shows libc.so.53.1, but no libc.so.51.0... B The
> > >>>> same thing happened after I built source over the weekend, and then
> > >>>> tried a pull this morning...
> > >>>
> > >>> libc.51.0 is from 4.6.
> > >>>
> > >>
> > >> I downloaded install47.iso from
> > ftp.openbsd.org/pub/OpenBSD/snapshots/i386/
> > >>
> > >>>> Tried to make a link from .51 to .53.1, but still did not work...
> > >>>
> > >>> This usually doesn't work. Try using "cvs" from -current. Did you
> > >>> install only some install sets?
> > >>>
> > >> Did a full install of all sets...
> > >>
> > >
> > Okay, I just re-pulled the install47.iso snapshot, and did a
> > re-install.  Here is the uname -a:
> > 
> > OpenBSD openbsd-v0.ultra-ats.com 4.7 GENERIC.MP#519 i386
> > 
> > and I receive the same error message as before when I try a pull from
> > the CVS server...  it asks me if I want to add the ssh keys, and I do,
> > then "cvs: can't load library 'libc.so.51.0'"
> > 
> > 
> > 
> > Anyone have any ideas...?
> > 
> > 
> > Bryan
> > 
> > 
> > 
> > 
> > Here is the dmesg, which I should have added before...
> > 
> > OpenBSD 4.7-current (GENERIC.MP) #519: Sun Apr 18 22:21:54 MDT 2010
> >     dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz ("GenuineIntel"
> > 686-class) 2.70 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3,SSSE3,CX16
> > real mem  = 536375296 (511MB)
> > avail mem = 510181376 (486MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 08/15/08, BIOS32 rev. 0 @
> > 0xfd780, SMBIOS rev. 2.4 @ 0xe4010 (45 entries)
> > bios0: vendor Phoenix Technologies LTD version "6.00" date 08/15/2008
> > bios0: VMware, Inc. VMware Virtual Platform
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP BOOT APIC MCFG SRAT
> > acpi0: wakeup devices PCI0(S3) USB_(S1) P2P0(S3) S1F0(S3) S2F0(S3)
> > S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3)
> > Z00P(S3) Z00Q(S3) Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3)
> > Z00W(S3) Z00X(S3) Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3) Z012(S3)
> > Z013(S3) Z014(S3) Z015(S3) Z016(S3) Z017(S3) Z018(S3) Z019(S3)
> > Z01A(S3) Z01B(S3) P2P1(S3) S1F0(S3) S2F0(S3) S3F0(S3) S4F0(S3)
> > S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3) Z00P(S3) Z00Q(S3)
> > Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3) Z00V(S3) Z00W(S3) Z00X(S3)
> > Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3) Z012(S3) Z013(S3) Z014(S3)
> > Z015(S3) Z016(S3) Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3)
> > P2P2(S3) S1F0(S3) S2F0(S3) S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3)
> > S7F0(S3) S8F0(S3) S9F0(S3) Z00P(S3) Z00Q(S3) Z00R(S3) Z00S(S3)
> > Z00T(S3) Z00U(S3) Z00V(S3) Z00W(S3) Z00X(S3) Z00Y(S3) Z00Z(S3)
> > Z010(S3) Z011(S3) Z012(S3) Z013(S3) Z014(S3) Z015(S3) Z016(S3)
> > Z017(S3) Z018(S3) Z019(S3) Z01A(S3) Z01B(S3) P2P3(S3) S1F0(S3)
> > S2F0(S3) S3F0(S3) S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3)
> > S9F0(S3) Z00P(S3) Z00Q(S3) Z00R(S3) Z00S(S3) Z00T(S3) Z00U(S3)
> > Z00V(S3) Z00W(S3) Z00X(S3) Z00Y(S3) Z00Z(S3) Z010(S3) Z011(S3)
> > Z012(S3) Z013(S3) Z014(S3) Z015(S3) Z016(S3) Z017(S3) Z018(S3)
> > Z019(S3) Z01A(S3) Z01B(S3) PE40(S3) S1F0(S3) PE50(S3) S1F0(S3)
> > PE60(S3) S1F0(S3) PE70(S3) S1F0(S3) PE80(S3) S1F0(S3) PE90(S3)
> > S1F0(S3) PEA0(S3) S1F0(S3) PEB0(S3) S1F0(S3) PEC0(S3) S1F0(S3)
> > PED0(S3) S1F0(S3) PEE0(S3) S1F0(S3) PE41(S3) S1F0(S3) PE42(S3)
> > S1F0(S3) PE43(S3) S1F0(S3) PE44(S3) S1F0(S3) PE45(S3) S1F0(S3)
> > PE46(S3) S1F0(S3) PE47(S3) S1F0(S3) PE51(S3) S1F0(S3) PE52(S3)
> > S1F0(S3) PE53(S3) S1F0(S3) PE54(S3) S1F0(S3) PE55(S3) S1F0(S3)
> > PE56(S3) S1F0(S3) PE57(S3) S1F0(S3) PE61(S3) S1F0(S3) PE62(S3)
> > S1F0(S3) PE63(S3) S1F0(S3) PE64(S3) S1F0(S3) PE65(S3) S1F0(S3)
> > PE66(S3) S1F0(S3) PE67(S3) S1F0(S3) PE71(S3) S1F0(S3) PE72(S3)
> > S1F0(S3) PE73(S3) S1F0(S3) PE74(S3) S1F0(S3) PE75(S3) S1F0(S3)
> > PE76(S3) S1F0(S3) PE77(S3) S1F0(S3) PE81(S3) S1F0(S3) PE82(S3)
> > S1F0(S3) PE83(S3) S1F0(S3) PE84(S3) S1F0(S3) PE85(S3) S1F0(S3)
> > PE86(S3) S1F0(S3) PE87(S3) S1F0(S3) PE91(S3) S1F0(S3) PE92(S3)
> > S1F0(S3) PE93(S3) S1F0(S3) PE94(S3) S1F0(S3) PE95(S3) S1F0(S3)
> > PE96(S3) S1F0(S3) PE97(S3) S1F0(S3) PEA1(S3) S1F0(S3) PEA2(S3)
> > S1F0(S3) PEA3(S3) S1F0(S3) PEA4(S3) S1F0(S3) PEA5(S3) S1F0(S3)
> > PEA6(S3) S1F0(S3) PEA7(S3) S1F0(S3) PEB1(S3) S1F0(S3) PEB2(S3)
> > S1F0(S3) PEB3(S3) S1F0(S3) PEB4(S3) S1F0(S3) PEB5(S3) S1F0(S3)
> > PEB6(S3) S1F0(S3) PEB7(S3) S1F0(S3) SLPB(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 65MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz ("GenuineIntel"
> > 686-class) 2.67 GHz
> > cpu1:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> > H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,SSE3,SSSE3,CX16
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpicpu0 at acpi0
> > acpicpu1 at acpi0
> > acpibat0 at acpi0: BAT1 not present
> > acpibat1 at acpi0: BAT2 not present
> > acpiac0 at acpi0: AC unit online
> > acpibtn0 at acpi0: SLPB
> > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xdc000/0x4000!
> > 0xe4000/0x4000!
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> > pci1 at ppb0 bus 1
> > piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
> > channel 0 configured to compatibility, channel 1 configured to
> > compatibility
> > wd0 at pciide0 channel 0 drive 0: <VMware Virtual IDE Hard Drive>
> > wd0: 64-sector PIO, LBA, 20480MB, 41943040 sectors
> > wd1 at pciide0 channel 0 drive 1: <VMware Virtual IDE Hard Drive>
> > wd1: 64-sector PIO, LBA, 40960MB, 83886080 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> ATAPI
> > 5/cdrom removable
> > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
> > disabled
> > "VMware Virtual Machine Communication Interface" rev 0x10 at pci0 dev
> > 7 function 7 not configured
> > vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > bha3 at pci0 dev 16 function 0 "BusLogic MultiMaster" rev 0x01: apic 2
> > int 17 (irq 11), BusLogic 9xxC SCSI
> > bha3: model BT-958, firmware 5.07B
> > bha3: sync, parity
> > scsibus1 at bha3: 8 targets, initiator 7
> > ppb1 at pci0 dev 17 function 0 "VMware Virtual PCI-PCI" rev 0x02
> > pci2 at ppb1 bus 2
> > vic0 at pci2 dev 0 function 0 "AMD 79c970 PCnet-PCI" rev 0x10: apic 2
> > int 18 (irq 10), address 00:0c:29:4c:b2:bd
> > eap0 at pci2 dev 1 function 0 "Ensoniq AudioPCI97" rev 0x02: apic 2
> > int 19 (irq 5)
> > ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
> > audio0 at eap0
> > midi0 at eap0: <AudioPCI MIDI UART>
> > ppb2 at pci0 dev 21 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci3 at ppb2 bus 3
> > ppb3 at pci0 dev 21 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci4 at ppb3 bus 4
> > ppb4 at pci0 dev 21 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci5 at ppb4 bus 5
> > ppb5 at pci0 dev 21 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci6 at ppb5 bus 6
> > ppb6 at pci0 dev 21 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci7 at ppb6 bus 7
> > ppb7 at pci0 dev 21 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci8 at ppb7 bus 8
> > ppb8 at pci0 dev 21 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci9 at ppb8 bus 9
> > ppb9 at pci0 dev 21 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci10 at ppb9 bus 10
> > ppb10 at pci0 dev 22 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci11 at ppb10 bus 11
> > ppb11 at pci0 dev 22 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci12 at ppb11 bus 12
> > ppb12 at pci0 dev 22 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci13 at ppb12 bus 13
> > ppb13 at pci0 dev 22 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci14 at ppb13 bus 14
> > ppb14 at pci0 dev 22 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci15 at ppb14 bus 15
> > ppb15 at pci0 dev 22 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci16 at ppb15 bus 16
> > ppb16 at pci0 dev 22 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci17 at ppb16 bus 17
> > ppb17 at pci0 dev 22 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci18 at ppb17 bus 18
> > ppb18 at pci0 dev 23 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci19 at ppb18 bus 19
> > ppb19 at pci0 dev 23 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci20 at ppb19 bus 20
> > ppb20 at pci0 dev 23 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci21 at ppb20 bus 21
> > ppb21 at pci0 dev 23 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci22 at ppb21 bus 22
> > ppb22 at pci0 dev 23 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci23 at ppb22 bus 23
> > ppb23 at pci0 dev 23 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci24 at ppb23 bus 24
> > ppb24 at pci0 dev 23 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci25 at ppb24 bus 25
> > ppb25 at pci0 dev 23 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci26 at ppb25 bus 26
> > ppb26 at pci0 dev 24 function 0 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci27 at ppb26 bus 27
> > ppb27 at pci0 dev 24 function 1 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci28 at ppb27 bus 28
> > ppb28 at pci0 dev 24 function 2 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci29 at ppb28 bus 29
> > ppb29 at pci0 dev 24 function 3 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci30 at ppb29 bus 30
> > ppb30 at pci0 dev 24 function 4 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci31 at ppb30 bus 31
> > ppb31 at pci0 dev 24 function 5 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci32 at ppb31 bus 32
> > ppb32 at pci0 dev 24 function 6 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci33 at ppb32 bus 33
> > ppb33 at pci0 dev 24 function 7 "VMware Virtual PCIE-PCIE" rev 0x01
> > pci34 at ppb33 bus 34
> > isa0 at piixpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pmsi0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pmsi0 mux 0
> > pcppi0 at isa0 port 0x61
> > midi1 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > mtrr: Pentium Pro MTRR support
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b

Reply via email to