Thank you Caspar I managed to build the latest source code OK and also found out that Qt 5 does not work on a Mac (I had to revert to 4.8 to make the GUI work properly).
One last question, once I simulate an image, is there any way to extract the simulated "ground truth" values per image voxel? I can see that the Compartment volume fractions can be generated, but what about fiber orientations? Best Stam On 19 Oct 2015, at 11:31, Goch, Caspar Jonas <c.g...@dkfz-heidelberg.de> wrote: > Hi Stam, > > as far as I am aware there is currently no definite date for the next MITK > Diffusion binary release. However, you can always build it yourself, as the > source code is freely available [1]. There have been however some major > changes to the source code (e.g. the removal of mitk::DiffusionImage in favor > of directly using mitk::Image), which might result in it being less stable > than a regular release. If you have no experience building MITK, take a look > at the developer documentation [2]. Please note we currently recommend Qt > 5.X, X < 5 (unless you are using Mac, in which case you need Qt 4.8.Y) > > Hope this helps, > Caspar > > [1] http://mitk.org/wiki/Downloads#MITK_Source_Code > [2] http://docs.mitk.org/nightly/StartingDevelopment.html > > > -----Ursprüngliche Nachricht----- > Von: Stamatios Sotiropoulos [mailto:stamatios.sotiropou...@ndcn.ox.ac.uk] > Gesendet: Sonntag, 18. Oktober 2015 10:14 > An: mitk-users@lists.sourceforge.net > Betreff: [mitk-users] Fiberfox diffusion MRI simulator - Inconsistency > between documentation and released version? > > Hi > > I am interested in the excellent Fiberfox simulator and the Advanced > simulation options. I can see there are plenty of them mentioned in the > documentation http://docs.mitk.org/nightly/org_mitk_views_fiberfoxview.html, > which however are not available in the latest released version > http://mitk.org/wiki/Download#MITK_Diffusion (for instance "Acquisition > Type", "Dwell Time", "Coil Sensitivity", T1 specification of compartments, > etc). > > Is there any plan for a new release of MITK_Diffusion in the near future that > will include these features? Or can I access them if I get the latest source > code and compile myself? Does this mean that these features are not yet > stable enough? > > Many thanks > Stam > > > ------------------------------------------------------------------------------ > _______________________________________________ > mitk-users mailing list > mitk-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/mitk-users ------------------------------------------------------------------------------ _______________________________________________ mitk-users mailing list mitk-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mitk-users
