OK, I think I did a dumb thing. I wanted to clean out my engine bay and went to a car wash. It didn't have very much pressure so I thought I wouldn't do any harm and it was the "engine degreasing" mode.
Well, now I have the low oil pressure light coming on and buzzing like hell (EXCRUTIATINGLY annoying) after the car has run for a few minutes. I know there are 2, but I can't find the .3 bar one in my Bentley. Everything leads to it being the one up by the cams (according to the diagnosis the manual offers), but they don't show where it is. I think what happened is that I fried one of the sensors and just need to replace it. Where is the low pressure one towards the top of the motor? I have checked the high pressure switch and it seems to be fine. Also, the car is running fine and I just changed the oil (with the correct OEM filter) and neither the oil temp or motor temp are running high. HELP!!!! Brice '89 GTi 16v (Mexican Production) _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
