The spline on the clutch disc is a different size, so are the drive flanges. You'll need new axles. Not sure about the flywheel my guess is that it's ok. I have a set of those drive shafts and an 8v trans in my garage , somewhere.
On Oct 17, 2010, at 12:28 PM, Les Noriel <[email protected]> wrote: > My 16v project marches onward. > I asked this question a couple years back but left it on an old computer and > no longer have it. > > My previous question was which transmission code suggested for an 020 5sp > transmission that will give me good freeway driving. I want a tall final > drive because in LA, most miles are spent on the freeway. I'm now at the > point where I'm running through salvage yards looking for parts and the > transmission is next. > > The answer I received was one for which I had forgotten the details. Was it > the "CHE" code transmission from the 2.0l MKIII? > > With this transmission, can I still use the 16V flywheel and clutch? Or do I > have to get different clutch? 210mm? > > If the 16V list expertise can "refresh" my aging memory--it would be greatly > appreciated! > > Thanks > > -Les > > > > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above.
