Connie,
What a way to end the season. Better at the end the at the beginning. I will
have a Foster's in your honor.
Irv
----- Original Message -----
From: "Conbert H Benneck" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, October 06, 2002 12:42 PM
Subject: M_Boats: Re: M_Boats:


> Hi Jerry,
>
> Yesterday, I hauled my M15 out of the water to put it to bed for the
> year.
>
> As it came out of the water, with the mast up, an overzealous friend
> driving my car wanted to be helpful and instead of just parking the rig,
> started driving it around the corner to the Marina.
>
> A large oak tree, with branches over the road, was the obstacle, and when
> mast hit oak branch - despite my yelling S T O P!!!! - the mast lost the
> battle.
>
> It collapsed with about a 90 degree bend just below the middle of the
> mast.
>
> He backed up and parked the rig, stammering apologies, but the damage was
> done.
>
> I tried straighening the mast by using a handy oak tree trunk and a large
> granite boulder, but the best I could do was to go from a 90 degree bend
> to about 120 degrees.  At that point the forces increased, and simply
> leaning on the end of the mast to bend it wouldn't do.
>
> It was enough so that I could put the mast in the holder of the trailer
> and drive home.
>
> Question:
>
> Can a mast be straightened, or is it scrap?
>
> Where did you buy the masts ?  (I most likely need a new one)
>
> Do you have any mast specs.; drawings; that I could use to tell the mast
> manufacturer what I want, and how to build it?  .......or do I just give
> him the old one and say, duplicate it?
>
> If I get a new one from a local mast manufacturer, do you have any
> improvements, or recommendations that you would incorporate?   . ...a
> "Tee" top for easier installation of a topping lift? Upgraded hardware?
>
> Tell me where to sip the FORSTERS Lager
>
> Connie Benneck
> M15  #400  LEPPO
> Glastonbury, CT
>
>
>
>
>
>
>
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to