I have just replaced my 1982 Trailrite trailer for my M15 with a new Pacific trailer.  
The company 
used the same specs as for the Nor'sea Montgomery 15 factory model, so I guess this is 
what you 
get with a new Montgomery.

My question concerns the telescoping tongue.  The telescoping beam that slides inside 
my trailer 
frame is 10 foot long, so when it is fully retracted, there is about 4 foot from the 
hitch to the mast 
stand.  This is great for the launch ramp, but a problem when backing the rig into my 
yard.  Would 
those of you with a factory trailer mind measuring your tongue?  (That is, the trailer 
tongue.  I 
really am not that curious about your personal anatomical details.)  I am thinking 
about cutting 
about 3 foot off the beam and would like to know what length others have found 
best.

My other comments are about the tongue jack and the lights.  The trailer comes with a 
Fulton 
Magnum Series Jack.  I have never been able to get more than about a years usage from 
Fulton 
Jacks.  If I leave them on the trailer; they corrode and freeze from the salt water.  
I therefore take it 
off when I put the trailer in the water, which is a bit of a nuisence.  Has anyone 
found either a way 
to preserve fulton jacks or a supplier of a better engineered jack?

And then there are the submersible lights. These lights have an air pocket around the 
lights that is 
suppose to keep the mechanism dry.  When I had the trailer in the water, I saw bubbles 
coming 
from the left light housing- not a good sign.  Again, these seem to have a very 
limited lifetime due 
to moisture on the contacts, and I have not had good luck with this system.  I always, 
if I do not 
forget, unplug the lights when putting the trailer in the water.  I also water proof 
all connections 
with an electrical sealant and will try to fix the air leak in the left light.  I have 
had much better luck 
with lights that are a sealed unit, so I guess I will just try to make these last and 
replace when 
needed.

Thanks for tolerating my grumbling.

Bob
M15 #208
Castro  Valley, CA



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to