Norm

You could also tape the bottom of the hole, then fill the entire space with
some mat fibers and epoxy to the top. After it cures, then re-drill the hole
with a 3/8 drill bit.

In either case we do have lead filled centerboards available. These will
never rust or crack.

Your close enough to come and get one.

Fair winds
Bob
(949) 489-8227

Norm Bundek wrote:

I did not change the opening to the hole.  The cracks and voids were on the 
inside.  I ended up using Bondo rather than 5 minute epoxy.  I knew that I 
would have to file with a rasp to the correct internal size.  Epoxy would have 
been like working in concrete.

Norm M15 #172
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats





_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to