It looks like what you need is the toggle, bottom barrel, and the screw. I happen to have a couple! How about 20. lus shipping? I'll need an address.
Jerry jerrymontgomery.org ----- Original Message ----- From: "Andrei Caldararu" <[EMAIL PROTECTED]> To: "For and about Montgomery Sailboats" <[email protected]> Sent: Friday, July 04, 2008 6:51 PM Subject: M_Boats: Help with M-17 Hardware > Dear Montgomery boats owners (and especially Jerry), > > my 1982 M-17 boat has a bent sidestay fitting, at the deck mounting > plate. The photo at > > http://www.math.wisc.edu/~andreic/SDIM0650.jpg > > shows the two fittings for the two sidestays, one that is in good > shape and the one that's bent. What looks to be bent is a fitting that > looks like half of a turnbuckle, its jaw, and the turnbuckle screw. Do > you happen to know who manufactures these, and where I can buy them > from? I vaguely remember Jerry saying that he had some of the original > hardware that was used for these boats, is this fitting one of them? > > A second question: the electrical connector that was connecting the > mast-top light to the deck-mounted fitting (at the end of the wire > that is at the base of the mast) has been cut-off by some previous > owner. Same question as above: who manufactures it, and where can it > be bought? The female connector on the deck looks like the male one > would screw into it, and it has two metal terminals inside that are > bent at 90 degrees angles. It has a metal cap that screw over it to > keep water from getting in. > > Thanks! > > Andrei. > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > -- > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.4.5/1536 - Release Date: 7/5/2008 10:15 AM > > _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
