Please ignore error report from my previous e-mail. I just forgot to run autoreconf -i.
I've successfully compiled (all tests passed) the latest revision 3947 from the trunk using the following configuration ./configure --prefix=/mingw --host=i686-pc-mingw32 --enable-gmpcompat I've used latest mingw32 with gcc 4.7.0 On Wed, Sep 26, 2012 at 1:52 AM, Bill Hart <goodwillh...@googlemail.com>wrote: > On 25 September 2012 17:02, Bill Hart <goodwillh...@googlemail.com> wrote: > > I would *really* appreciate some help with the Mingw32 issue. What we > > need to do is bisect the repo (svn trunk) and rebuild mpir until we > > find out which commit caused mingw32 to stop working. It might only be > > necessary to run configure and check to see if config.h has been > > populated correctly with all the HAVE_NATIVE flags, which would save a > > lot of time. > > Below is the relevant information from a previous post by Jason which > explains what goes wrong. It has always been a problem on MinGW64, but > seems to be a problem now on MinGW32. > > At any rate, all that would be required is to build mpir from svn > trunk starting with the revision corresponding to mpir-2.5.1 (where it > presumably last worked on MinGW32), i.e. revision 3850 and find which > commit before revision 3949 causes the config.h file to not be > properly populated as explained by Jason below. > > Any volunteers? > > --------------- > > I figured out what going on here , basically configure is failing to > populate config.h with the required > #define HAVE_NATIVE_mpn_addmul_2 1 > and all the others , it has always done this on mingw64 but because of > the way the C file redc_2 uses addmul_2 it now causes a problem.A > quick fix is to delete the lines in the mpn/generic/redc_2.c file > where it trys to redefine addmul_2 > > I don't know why configure fails to populate config.h , it manages to > do the sym links > > ---------------- > > Bill. > > -- > You received this message because you are subscribed to the Google Groups > "mpir-devel" group. > To post to this group, send email to mpir-devel@googlegroups.com. > To unsubscribe from this group, send email to > mpir-devel+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/mpir-devel?hl=en. > > -- You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to mpir-devel@googlegroups.com. To unsubscribe from this group, send email to mpir-devel+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en.