Try adding .0 to the end of the OIDs, this may be the problem. Also, the error message says this OID does not exist - maybe the reason is that your device simply does not support temperature readings?
Steve ________________________________ From: [email protected] [[email protected]] On Behalf Of NAP [[email protected]] Sent: Wednesday, 9 September 2009 7:40 a.m. To: [email protected] Subject: [mrtg] error in temperature oid ### I can’t to read temperature in my cisco 6509, Could you tell me what happen ???. Regards, Miguel Target[nap1.temp]: 1.3.6.1.4.1.9.9.13.1.3.1.3.1&1.3.6.1.4.1.9.9.13.1.3.1.3.3:[email protected] Directory[nap1.temp]: temperatura YLegend[nap1.temp]: Degrees C ShortLegend[nap1.temp]: °C MaxBytes[nap1.temp]: 60 PageTop[nap1.temp]: <H1> Temperatura - Crb-3 </H1> Options[nap1.temp]: nopercent, growright, gauge AbsMax[nap1.temp]: 60 Title[nap1.temp]: Temperatura Router Crb-3 Legend1[nap1.temp]: Promedio 1 minuto temperatura admisi<F3>n (Inlet) Legend2[nap1.temp]: Promedio 1 minuto temperatura de extracci<F3>n (Outlet) LegendI[nap1.temp]: Inlet: LegendO[nap1.temp]: Outlet: --------------------------------------------------------------------------------------------------------------------- ### log 2009-09-08 15:24:00 -- Started mrtg 2009-09-08 15:24:00 -- SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1) SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161) community: "napgate" request ID: -498128576 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486 2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.3 sysUptime sysName on [email protected]::::::v4only at /usr/local/bin/mrtg line 1798 2009-09-08 15:24:00 -- SNMP Error: Received SNMP response with error code error status: noSuchName index 1 (OID: 1.3.6.1.4.1.9.9.13.1.3.1.3.1) SNMPv1_Session (remote host: "i.p.my.route" [i.p.my.route].161) community: "napgate" request ID: -498128575 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/local/lib/perl5/site_perl/5.6.1/SNMP_util.pm line 486 2009-09-08 15:24:00 -- SNMPGET Problem for 1.3.6.1.4.1.9.9.13.1.3.1.3.1 1.3.6.1.4.1.9.9.13.1.3.1.3.2 sysUptime sysName on [email protected]::::::v4only at /usr/local/bin/mrtg line 1798 2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_IN_] ' $target->[0]{$mode} ' did not eval into defined data 2009-09-08 15:24:00 -- ERROR: Target[nap1.temp][_OUT_] ' $target->[0]{$mode} ' did not eval into defined data 2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, inlast is not defined 2009-09-08 15:24:00 -- WARNING: Skipping Update of nap1.temp, outlast is not defined 2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_IN_] ' $target->[1]{$mode} ' did not eval into defined data 2009-09-08 15:24:00 -- ERROR: Target[crb3.temp][_OUT_] ' $target->[1]{$mode} ' did not eval into defined data 2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, inlast is not defined 2009-09-08 15:24:00 -- WARNING: Skipping Update of crb3.temp, outlast is not defined
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
