On Thu, Aug 05, 2010 at 12:15:57AM +0200, Chris Liechti wrote: > Am 04.08.2010 23:52, schrieb Daniel Beer: > > There is a driver in MSPDebug for accessing the FET bootloader, but so > > far I haven't been brave enough to try using it for erasing and > > writing. I currently have no other way of debugging the FET if I break > > the firmware. > > make your experiments with a UIF box. it has a JTAG header inside which > allows you to upload (and later restore) the current firmware with a > second JTAG adapter. > > chris
Hi Chris, That had occured to me, but my problem is that I'm _very_ short on equipment. Apart from a FET430UIF, the only other debugger I have is an eZ430-RF2500, which apparently only does Spy-Bi-Wire (and the MSP430F1612 inside the FET only does JTAG). I do have another JTAG adapter (a fairly dumb one) and I was thinking at some stage to implement a raw JTAG driver for MSPDebug. If I manage to get this working, this could solve my first problem, assuming I don't get more equipment by then. Cheers, Daniel
