On Wed, Aug 4, 2010 at 5:56 PM, Daniel Beer <[email protected]> wrote: > On Thu, Aug 05, 2010 at 12:15:57AM +0200, Chris Liechti wrote: >> Am 04.08.2010 23:52, schrieb Daniel Beer: >> > There is a driver in MSPDebug for accessing the FET bootloader, but so >> > far I haven't been brave enough to try using it for erasing and >> > writing. I currently have no other way of debugging the FET if I break >> > the firmware. >> >> make your experiments with a UIF box. it has a JTAG header inside which >> allows you to upload (and later restore) the current firmware with a >> second JTAG adapter. >> >> chris > > Hi Chris, > > That had occured to me, but my problem is that I'm _very_ short on > equipment. Apart from a FET430UIF, the only other debugger I have is > an eZ430-RF2500, which apparently only does Spy-Bi-Wire (and the > MSP430F1612 inside the FET only does JTAG). > > I do have another JTAG adapter (a fairly dumb one) and I was thinking > at some stage to implement a raw JTAG driver for MSPDebug. If I manage > to get this working, this could solve my first problem, assuming I > don't get more equipment by then. >
It would be sweet if you could get MSPDebug working with a GoodFET. Do you have one? Regards, Mark markra...@gmail -- Mark Rages, Engineer Midwest Telecine LLC [email protected]
