I started out by building a mesh G network using linksys 54g's. This was good for the basics but when it came to streaming the vob's it often break down even, also interference was causing speed drop outs so it would renegotiate at 12 or so for a wile, this would make streams unusable even if a I set s huge cache on mp layer. So I sucked it up and spent a weekend and about a hundred bucks wiring the whole house with cat. It was a total pain in the ass but the end result has been very worth it. WAF has gone way up since I finished that.
-Griffon On 5/1/05, Mark Knecht <[EMAIL PROTECTED]> wrote: > On 4/30/05, Chris Pinkham <[EMAIL PROTECTED]> wrote: > > > That's what I ended up doing as well. I recommend the Linksys WRT54G > > > router > > > which you can then turn into a wireless bridge through modified firmware, > > > the best of which, IMO, is available at http://www.sveasoft.com . These > > > things can frequently be had for around $50 after rebate, which there is > > > usually one somewhere. > > > > I'm using my WRT54G as a bridge between my wired and wireless networks using > > stock firmware. The frontend in my living room uses a Belkin PCI 54G card > > using ndiswrapper. I'm able to transfer about 3Mbytes/sec over the > > network from one of my wired servers. Seems to be working pretty well. > > My wifes computer (which is used a lot more heavily than the Myth frontend > > usually) is also connected at 54Mb/s via another Belkin PCI card using > > ndiswrapper. I don't use the Linksys as my router to the internet, it > > is only used a a wireless bridge between my internal networks. > > > > -- > > Chris > > So 3MB/S == 27Mb/S or about half the advertized speed. I suspect that > this is pretty good with network overhead. > _______________________________________________ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > -- -Griffon _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users