I'm having trouble to enable the tv-out on my PVR350. When I hook up my tv to the composite out, I only have a black screen in mythtv when I select live tv. I do have the images on my monitor. The tv-out option in the settings has been selected!
I'm using SuSe 9.3 and ivtv-0.2.0-rc3j. Any help would be much appreciated. Ivan *************************** * modprobe.conf.local *************************** #ivtv modules setup alias char-major-81 videodev alias char-major-81-0 ivtv options ivtv ivtv_std=2 tda9887=0 install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb ivtv: unsupported module, tainting kernel. ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.2 (c) loading ivtv: Linux version: 2.6.11.4-21.7-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x0391 vendor: 0x1106 ivtv: i2c attach [client=tveeprom,ok] ivtv: Tuner Type 5, Tuner formats 0x00000007, Radio: yes, Model 0x00a93491, Revision 0xf36a6633 ivtv: Radio detected tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: i2c attach [client=saa7115[0],ok] ivtv: i2c attach [client=saa7127[0],ok] msp34xx: ivtv version ivtv: i2c attach [client=MSP3418W-A2,ok] ivtv: requesting firmware ivtv: firmware loaded ivtv: requesting firmware ivtv: firmware loaded ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes total ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 1 ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create stream 2 using 40 52224 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 3 using 455 4608 byte buffers 2097152 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create DMA stream 8 using 6 103680 byte buffers 622080 kbytes total ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 9 using 32 65536 byte buffers 2097152 kbytes total ivtv: Setting Tuner 5 tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by ivtv i2c driver #0 ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to PAL. ivtv: ivtv_enc_thread: pid = 6597, itv = 0xf369b3a0 ivtv: ivtv_dec_thread: pid = 6598, itv = 0xf369b3a0 ivtv: i2c client addr: 0x43 not found! ivtv: Initialized WinTV PVR 350, card #0 ivtv: ==================== END INIT IVTV ==================== ivtv_fb: unsupported module, tainting kernel. ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0) ivtv-osd: Framebuffer is at decoder-relative address 0x00510000 and has 1704960 bytes. ivtv-osd: screen coords: [0 0] -> [720 576] ivtv-osd: original global alpha = 208 ivtv-osd: current OSD state = 39 ivtv-osd: new global alpha = 208 (1 255 0) ivtv-osd: framebuffer at 0xdd510000, mapped to 0xf4510000, size 1620k ivtv-osd: mode is 720x576x32, linelength=2880 ivtv-osd: fb1: iTVC15 TV out frame buffer device _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users