Probably the best way to send the audio to the tv speakers is the same for connecting your computer to a stereo receiver. You will need a wire that on one end is an analogue jack (i.e. the plug on a pair of headphones) and on the other end is two RCA (aka. composite [i think]) jacks that are usually colored one white and one red. If you've ever hooked up a VCR/DVD player you should know what these look like. If your TV was made in the past 5 years, it should have female RCA connectors either on the back or on the front. Match the colors.
As for the blank TV display, first make sure your video drivers are properly installed (seems like you've done this) then go into $mythtv-setup -> capture cards and set up your capture card. As was mentioned before, be aware of the PAL or NTSC. NTSC for the United States and most of North America and PAL for Europe. Hope my comments are helpful. -Tom Bill Baker wrote: >On Mon, 2006-01-23 at 23:04 -0500, Tim wrote: > > >>1) no. your tv has no idea what channel your mythtv tuner is on. your tv >>has no info on the sound of your recordings. you can send the sound from >>your mythtv box to your tv speakers, but you will need a sound card (pvr-350 >>may export sound). >> >> > >Do you know how I can send the sound from my mythtv box to my TV >speakers? > > > >>2) no. it sounds like a setup/channel tuning issue. >> >> > >Do you/anyone else have any idea on how to correct this? Any further >information you need from me? > > > >>3)PAL or NTSC >> >> > >Is that it? I was trying to change the screen resolution in xorg.conf. > > > >>although, i'm a noob myself... >> >> > >Thank you for your answers. > >_______________________________________________ >mythtv-users mailing list >mythtv-users@mythtv.org >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
