On 14 Jan 2013, at 4:00 PM, James Wininger <jwinin...@ifncom.net> wrote: > All, > > We are running into an issue with Brocade where we are finding it difficult > to to graph VLAN interfaces for bits (in/out) across a tagged (trunk) > interface. On Cisco this is not an issue. So what we end up with in Cacti is > a blank (no data) graph. > > I have been all over these devices with snmpwalk etc (typical tool set). Has > anyone found a "fix" or work around for this? Or perhaps I should be asking a > different question….Is there a better tool/mindset for 95% billing since this > is what we are doing with this info.
I second Pui's suggestion for taking a look at Observium, it's got a vastly more NOC-friendly build than what Cacti's reigning philosophy appears to be. Might not be perfect for everyone, but certainly worth a bit of time to check out. As for your Cacti problem, it's likely the 64-bit counters thing. Cacti's templates don't default to 64-bit counters. -J