I saw the same issue for getting OpenFlow stats, you need the new 8x10 or 100GE cards afaict.
On Jan 14, 2013, at 9:38 AM, Jeroen Wunnink | Atrato IP Networks <jeroen.wunn...@atrato-ip.com> wrote: > Sneaky hack: Slap an in+out rate limit on the vlan with high settings (i.e. > same as port/lag speed) and just graph the OID of the rate limit counter :-) > Might need to take a multiplier calculation/CDEF into account based on the > number of ports you have in the lag. > > The new 8x10 cards have built in ve counters indeed which makes it a lot > easier > > > > On 1/14/13 5:37 PM, Erik Muller wrote: >> On 1/14/13 9:00 , James Wininger wrote: >>> All, >>> >>> We are running into an issue with Brocade where we are finding it difficult >>> to to graph VLAN interfaces for bits (in/out) across a tagged (trunk) >>> interface. On Cisco this is not an issue. So what we end up with in Cacti >>> is a blank (no data) graph. >> >> Depending on the specific hardware you're using, you may be out of luck - >> early generations of MLX/XMR line cards don't support per-vlan statistics; >> you need to have the new 8x10GE cards (or a few others of the current >> generation) to have those counters available. >> >> -e >> > > > -- > > Jeroen Wunnink > Network Engineer > Atrato IP Networks > jeroen.wunn...@atrato-ip.com > Phone: +31 20 82 00 623 > >