Yeah, my cherry display has 6 digits with a colon between hours and minutes, with 7 segments and pins along one edge. the seconds digits are smaller. there are also am / pm indicators which are pretty burned up and which i don't expect to duplicate in a new display. the segments are burning out especially on the hrs digit.
i did get a pinball display (sp-492 on a board that i had to desolder - display looks to be same size as my cherry.) but none of the 39 pins matched up and it would have been a major hack job plus i would have to drill new holes in my board for the extra 4 pins. on my display if i am counting from the right direction on my 35 pins, digits are 1&2, 6&7, 13&14, 17,18, & 20, 23 & 24, and 28. the segments are 9, 10, 22,19,21 and 11. i have no connections on pins 3,8,12,15,25,26,27 and 29 and 30 there is light around the outer edge of the display just as it merges with the frame so that is probably the ka stuff. i have to check for the resistors mentioned by Quixotic Nixotic and see if i have similar values anywhere. i have resistors that are probably used for the colon and am/pm but i haven't checked the values. my clock ic mk50252. i know i probably won't find a perfect match but i hope to get a 35 pins that has some pins in common. with a pinball display, i give up the colon and am'pm as well as the smaller digits for seconds. of course that is acceptable. i dealt with Tim in Minnesota for the sp-492 display but he said all his displays are for pinballs and are pretty much pin compatible. hopefully, someone, somewhere has an old display they aren't using that helps me. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To view this discussion on the web, visit https://groups.google.com/d/msg/neonixie-l/-/cvP50uiv-tAJ. To post to this group, send an email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/neonixie-l?hl=en-GB.
