Ike, That's something worth considering. It looks like the folks who owned the board before me recorded a lot of synths. There's a boatload of plugs labled synth. I'm going to have to approach it slowly and tackle this one step at a time. I have a private studio so I'm in no hurry. Some of the snakes with Edac ends have 2 snakes coming out of it with a combination of connections, some DB & XLR. I'll also need to figure out where things show up on the patchbay. Like I said, one step at a time! It may take me a while, but hopefully it will be worth it.
Thanks again, Dave ---- Original Message ---- From: [email protected] To: [email protected] Subject: Re: NEOTEK: EDAC Connections Date: Wed, 31 Mar 2010 09:52:26 -0400 >Here's an idea: why not build some DB-25 to 1/4" snakes to adapt the > >existing PT cables? That way you don't have to touch the edac end, >and >you will be able to interface with most recording devices, now and in > >the future. >Best >Ike > >Sent from my iPhone > >On 2010-03-30, at 5:40 PM, [email protected] wrote: > >> Ike, >> All of the cable snakes have edac connectors on the board end. I >> have 2 HD24XR machines that only accept 1/4" plugs, so I'll have to >> change those over. I'm going to take it slow and tackle the >> connections as I go. I may have to make some changes on the >> multitrack returns at the board, in which case I'll probably need >to >> figure out the pin layout so I can return signal to all 40 channels >> if I need to. The board is 40x26x8. >> >> Dave >> >> ---- Original Message ---- >> From: [email protected] >> To: [email protected] >> Subject: Re: NEOTEK: Power Supply Connections >> Date: Tue, 30 Mar 2010 12:31:22 -0400 >> >>> Hi David >>> If your edac cons already have cable in them you should only >>> have to re- terminate the other end (don't the Alesis decks use a >56 >>> >>> pin edac for I/O)? >>> In any case edac product including pins and tooling are >>> available from digi-key and others. >>> Reverb 1-4 is probably the Aux 1-4 sends that you would plug >>> >>> into your fx units. >>> Best >>> Ike >>> >>> Sent from my iPhone >>> >>> On 2010-03-30, at 11:09 AM, [email protected] wrote: >>> >>>> Thanks again Ike, >>>> I've got an edac snake for the master section. The snake is >>> labled >>>> like this: >>>> >>>> Cue 1 & 2 In L-R >> >------ > >View the list online at: >http://www.mail-archive.com/[email protected] > >You can unsubscribe at anytime by sending an email to >mailto:[email protected] with "unsubscribe neotek" in the >message body. If you have any difficulties, or questions --please >send an email to mailto:[email protected]. > >The Neotek list is lovingly hosted by Catapult Web. Remember that any >message or reply sent to the list will be automatically forwarded to >all subscribers. > >Vive Le Neotek! > >Thanks. ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
