Hi Dave
You have to make sure of a couple of things:
1) that the input is routed to the stereo mix. If you are using the
large fader, you need to push the "Rev" button.
2) you need to make sure that you are listening to the stereo mix.
This is simply a case of making sure that all four of the "Tape-1",
"Tape-2" buttons are in the up position and that the master fader is up.
And finally, the Track Studio, in Plano, TX have a full .PDF
of the Elite manual on their website. I don't have the URL handy, but
it's in the equipment list under "console".
Best
Ike Zimbel
Zimbel Audio Ltd
416-720-0887
www.zimbelaudio.com
Sent from my iPhone
On 2010-07-18, at 10:36 AM, [email protected] wrote:
Well, after several months of healing (torn wrist tendon) I'm back at
connecting up the Elite. I hooked up the 24 channel snake box that
came with the console and plugged in a mic. I see the CH 1 meter
reading the signal, but I'm not hearing a thing. Being a Neotek
newbie and not knowing much about this board, it's probably something
simple that I've overlooked. I've tried other channels and mic
cables, but still no sound. I spent several hours yesterday to no
avail. So far, all I have connected is the master section snake (I'm
playing back music through all speakers fine) and the snake box. What
could I be doing wrong?
---- Original Message ----
From: [email protected]
To: [email protected]
Subject: Re: NEOTEK: Power Supply Connections
Date: Tue, 30 Mar 2010 16:22:56 +0100
Hi Dave
EDACs have 3 possible pin types.
One is for circuit board mounting, which you won't have.
Then there is a crimp type which needs the correct tool to make
connections.
Lastly there is solder type which you obviously solder.
You can get a pin ejector tool which you can release the gold pins
from
the housing if you need to 'reallocate' a few connections. The
ejector
will release all 3 types of pin.
In desperation you can get the pins out using a very fine jewellers
screwdriver as the pins have a 'barb' on one side which lock into the
plastic moulding.
Matt S
[email protected] wrote:
Thanks again Ike,
I've got an edac snake for the master section. The snake is
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
