I understand why you want to change the character of your signal on your main outs. I have altered the main stereo output of my Neotek series 1e console with fantastic results. But as far as your direct outs why? I think one of the best features of the Neotek design is the minimal signal path, part of this has to do with the lack of op-transformers. Unless I'm misunderstanding the way your planning on doing it is coming from your single channel direct output on a channel strip. Then inserting it into a line in > transformer > Tape/DAW. Can you not just line into any preamp you have like an API 512c it will hit the transformer. Is this the same concept or am I missing something?
Sent from my iPhone On Mar 17, 2011, at 9:32 AM, Tom G <[email protected]> wrote: Hello Greg, I'm doing it more for sonic character. So...I plan on building a box with multiple (two tranny's per set) sets of different transformers. (i.e. Edcor, UTC, Jensen, etc.) as money permits. I would like to have two or three different sets of transformers to use on the main outs, then maybe a couple "stand alone" trannys for solely using on a direct outs. Either I'll build one chassis with enough expansion room, or just build what I need for now and make another box when the time comes. I have a 30" metal brake I bought just for these projects so making a box is quite easy. Thanks for all the info guys! Tom --- On Thu, 3/17/11, Greg Norman <[email protected]> wrote: From: Greg Norman <[email protected]> Subject: Re: NEOTEK: Adding Transformers To: [email protected] Date: Thursday, March 17, 2011, 2:12 AM Are you doing this for sonics or utility? Greg Norman Electrical Audio Recording 773.539.2555 www.electrical.com On Mar 14, 2011, at 11:34 AM, Tom G wrote: Hello, I have been thinking about adding some output transformers to my Series One. I am thinking about building a rack chassis with two (for now) transformers and having them available via patchbay... so obviously they are not technically in the Neotek. I could then patch them in on a direct output or on the master outs before hitting tape or my convertors. Should be easy enough, but my question is if anyone has some suggestions as to what transformer is a good match sonically with a Series One. I am considering this only for more options in terms of adding some different sonic charactor and color. The design would be just a passive circuit. Tom
