Thanks Ed/Dave
fyi, the conf file pasted earlier is one that a coworker devised on AIX
using the snnpconf. However, interestingly, when I use the following
snmpd.conf that I generated myself on Solaris, the 'snmpget -c ....'
works fine. Also, following the 'good' snmpd.conf file, Dave you will
see the output from the snmpd -f -Le -Dread_config -d' using the
snmpd.conf file that my coworker generated.
To summarize: When I use the snmpd.conf file that I generate on my
system (which follows below), snmpget -c .... works.
When I use snmpd.conf that my coworker generated on AIX (pasted wayy
down below in the original email), snmpget -c ... timeout.
Dave, the debug info. is pasted below when issuing snmpget -f -Le
-Dread_config -d using the snmpd.conf file my coworker generated below.
My goal is to use my coworkers snmpd.conf file ultimately (the
snmpd.conf pasted wayy below in the original email). I just don't know
why it's not responding to the snmpget -c ....
Does this help? Thanks again for your response.
========================= Good snmpd.conf file - snmpget works with this
============================================
########################################################################
###
#
# snmpd.conf
#
# - created by the snmpconf configuration program
#
########################################################################
###
# SECTION: System Information Setup
#
# This section defines some of the information reported in
# the "system" mib group in the mibII tree.
# syslocation: The [typically physical] location of the system.
# Note that setting this value here means that when trying to
# perform an snmp SET operation to the sysLocation.0 variable will
make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: location_string
syslocation Cambridge,MA
# syscontact: The contact information for the administrator
# Note that setting this value here means that when trying to
"snmpd.conf.mine" 93 lines, 2470 characters
# perform an snmp SET operation to the sysContact.0 variable will make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: contact_string
syscontact "Randy 5-1901"
########################################################################
###
# SECTION: Access Control Setup
#
# This section defines who is allowed to talk to your running
# snmp agent.
# rwuser: a SNMPv3 read-write user
# arguments: user [noauth|auth|priv] [restriction_oid]
rwuser randy
# rouser: a SNMPv3 read-only user
# arguments: user [noauth|auth|priv] [restriction_oid]
rouser rouser .1.3.6.1.4.1.1139
# rocommunity: a SNMPv1/SNMPv2c read-only access community name
# arguments: community [default|hostname|network/bits] [oid]
rocommunity public .1.3.6.1.2.1.1
# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
# arguments: community [default|hostname|network/bits] [oid]
rwcommunity private 127.0.0.1
########################################################################
###
# SECTION: Trap Destinations
#
# Here we define who the agent will send traps to.
# trap2sink: A SNMPv2c trap receiver
# arguments: host [community] [portnum]
trap2sink lca1099
# trapcommunity: Default trap sink community to use
# arguments: community-string
trapcommunity public
# authtrapenable: Should we send traps when authentication failures
occur
# arguments: 1 | 2 (1 = yes, 2 = no)
authtrapenable 2
===================================== Output from 'snmpd -f -Le
-Dread_config using snmpd.conf devised by my coworker using snmpconf
===============================================
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:44 examining:
rwuser
auth
read_config: Found a parser. Calling it: rwuser / auth
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:54 examining:
rocommu
nity whatever
read_config: Found a parser. Calling it: rocommunity / whatever
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:59 examining:
rwcommu
nity private
read_config: Found a parser. Calling it: rwcommunity / private
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:76 examining:
trap2si
nk 168.159.121.153 public
read_config: Found a parser. Calling it: trap2sink / 168.159.121.153
public
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:86 examining:
trapcom
munity public
read_config: Found a parser. Calling it: trapcommunity / public
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:91 examining:
authtra
penable 2
read_config: Found a parser. Calling it: authtrapenable / 2
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:116
examining: agenta
ddress 1161
read_config: Found a parser. Calling it: agentaddress / 1161
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:123
examining: com2se
c notConfigUser default public
read_config: Found a parser. Calling it: com2sec / notConfigUser
default
public
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:44 examining:
rwuser
auth
read_config: Found a parser. Calling it: rwuser / auth
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:54 examining:
rocommu
nity whatever
read_config: Found a parser. Calling it: rocommunity / whatever
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:59 examining:
rwcommu
nity private
read_config: Found a parser. Calling it: rwcommunity / private
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:76 examining:
trap2si
nk 168.159.121.153 public
read_config: Found a parser. Calling it: trap2sink / 168.159.121.153
public
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:86 examining:
trapcom
munity public
read_config: Found a parser. Calling it: trapcommunity / public
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:91 examining:
authtra
penable 2
read_config: Found a parser. Calling it: authtrapenable / 2
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:116
examining: agenta
ddress 1161
read_config: Found a parser. Calling it: agentaddress / 1161
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:123
examining: com2se
c notConfigUser default public
read_config: Found a parser. Calling it: com2sec / notConfigUser
default
public
group1 "" any noAuthNoPriv exact allview none none
read_config: Found a parser. Calling it: access / group1 "" any
noAu
thNoPriv exact allview none none
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:131
examining: access
notConfigGroup "" any auth exact allview none none
read_config: Found a parser. Calling it: access / notConfigGroup ""
any
auth exact allview none none
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:143
examining: master
agentx
read_config: Found a parser. Calling it: master / agentx
Turning on AgentX master support.
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.conf:147
examining: agentX
Socket udp:localhost:705
read_config: Found a parser. Calling it: agentXSocket /
udp:localhost:705
read_config: /opt/emc/dist/local/usr/share/snmp/snmpd.local.conf: No
such file o
r directory
read_config: config dir: /opt/emc/dist/local/usr/lib/snmp
read_config: Directory not present: /opt/emc/dist/local/usr/lib/snmp
read_config: config dir: //.snmp
read_config: Directory not present: //.snmp
read_config: config path used for snmpd:/var/net-snmp (persistent
path:/var/net
-snmp)
read_config: config dir: /var/net-snmp
read_config: Reading configuration /var/net-snmp/snmpd.conf
read_config: /var/net-snmp/snmpd.conf:32 examining: usmUser 1 3
0x80001f88801bea
6feb47261304 0x414e65774461793500 0x414e65774461793500 NULL
.1.3.6.1.6.3.10.1.1.
2 0x5069c825448c5b6bd4281aaf3ce2ddb5 .1.3.6.1.6.3.10.1.2.2
0x5069c825448c5b6bd42
81aaf3ce2ddb5 0x00
read_config: Found a parser. Calling it: usmUser / 1 3
0x80001f88801bea6feb4726
1304 0x414e65774461793500 0x414e65774461793500 NULL
.1.3.6.1.6.3.10.1.1.2 0x5069
c825448c5b6bd4281aaf3ce2ddb5 .1.3.6.1.6.3.10.1.2.2
0x5069c825448c5b6bd4281aaf3ce
2ddb5 0x00
read_config: /var/net-snmp/snmpd.conf:33 examining: setserialno
764030627
read_config: Found a parser. Calling it: setserialno / 764030627
read_config: /var/net-snmp/snmpd.conf:41 examining: engineBoots 80
read_config: Found a parser. Calling it: engineBoots / 80
read_config: /var/net-snmp/snmpd.conf:42 examining: oldEngineID
0x80001f88801bea
6feb47261304
read_config: /var/net-snmp/snmpd.local.conf: No such file or directory
read_config: config path used for
agentx:/opt/emc/dist/local/usr/etc/snmp:/opt/
emc/dist/local/usr/share/snmp:/opt/emc/dist/local/usr/lib/snmp://.snmp
(persiste
nt path:/var/net-snmp)
read_config: config dir: /opt/emc/dist/local/usr/etc/snmp
read_config: Directory not present: /opt/emc/dist/local/usr/etc/snmp
read_config: config dir: /opt/emc/dist/local/usr/share/snmp
read_config: /opt/emc/dist/local/usr/share/snmp/agentx.conf: No such
file or dir
ectory
read_config: /opt/emc/dist/local/usr/share/snmp/agentx.local.conf: No
such file
or directory
read_config: config dir: /opt/emc/dist/local/usr/lib/snmp
read_config: Directory not present: /opt/emc/dist/local/usr/lib/snmp
read_config: config dir: //.snmp
read_config: Directory not present: //.snmp
read_config: config path used for agentx:/var/net-snmp (persistent
path:/var/ne
t-snmp)
read_config: config dir: /var/net-snmp
read_config: /var/net-snmp/agentx.conf: No such file or directory
read_config: /var/net-snmp/agentx.local.conf: No such file or directory
read_config: config path used for
snmp:/opt/emc/dist/local/usr/etc/snmp:/opt/em
c/dist/local/usr/share/snmp:/opt/emc/dist/local/usr/lib/snmp://.snmp
(persistent
path:/var/net-snmp)
read_config: config dir: /opt/emc/dist/local/usr/etc/snmp
read_config: Directory not present: /opt/emc/dist/local/usr/etc/snmp
read_config: config dir: /opt/emc/dist/local/usr/share/snmp
read_config: /opt/emc/dist/local/usr/share/snmp/snmp.conf: No such file
or direc
tory
read_config: /opt/emc/dist/local/usr/share/snmp/snmp.local.conf: No such
file or
directory
read_config: config dir: /opt/emc/dist/local/usr/lib/snmp
read_config: Directory not present: /opt/emc/dist/local/usr/lib/snmp
read_config: config dir: //.snmp
read_config: Directory not present: //.snmp
read_config: config path used for snmp:/var/net-snmp (persistent
path:/var/net-
snmp)
read_config: config path used for snmp:/var/net-snmp (persistent
path:/var/net-
snmp)
read_config: config dir: /var/net-snmp
read_config: /var/net-snmp/snmp.conf: No such file or directory
read_config: /var/net-snmp/snmp.local.conf: No such file or directory
read_config: storing: #
# net-snmp (or ucd-snmp) persistent data file.
#
########################################################################
####
# STOP STOP STOP STOP STOP STOP STOP STOP STOP
#
# **** DO NOT EDIT THIS FILE ****
#
# STOP STOP STOP STOP STOP STOP STOP STOP STOP
########################################################################
####
#
# DO NOT STORE CONFIGURATION ENTRIES HERE.
# Please save normal configuration tokens for snmpd in
SNMPCONFPATH/snmpd.conf.
# Only "createUser" tokens should be placed here by snmpd
administrators.
# (Did I mention: do not edit this file?)
#
-----Original Message-----
From: Kuczynski, Edward [mailto:[EMAIL PROTECTED]
Sent: Friday, December 21, 2007 3:01 PM
To: Smith, Randy; net-snmp-users@lists.sourceforge.net
Subject: RE: Timeout: No Response from localhost.
We ran into a problem having both readonly and r/w in the conf file for
v2.
It wouldn't hurt to comment out the r/w and try again.
Just a thought.
Ed
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Friday, December 21, 2007 1:01 PM
To: net-snmp-users@lists.sourceforge.net
Subject: Timeout: No Response from localhost.
Hi,
I was wondering if someone could take a quick look at my conf file below
and see why when I do the following:
/opt/emc/dist/local/usr/bin/snmpget -v 1 -c whatever localhost
SNMPv2-MIB::sysUp
Time.0
I get the following error message:
Timeout: No Response from localhost.
This is assuming of course that startup of 'snmpd' master agent is
successful (I tried the patch to get rid of the first three messages and
it didn't work but apparently it the agent is running noneless).
# snmpd -f -Le
netsnmp_assert !"registration != duplicate" failed agent_registry.c:535
netsnmp_assert !"registration != duplicate" failed agent_registry.c:535
netsnmp_assert !"registration != duplicate" failed agent_registry.c:535
Turning on AgentX master support.
NET-SNMP version 5.4.1
Thank you again for your response,
Randy
########################################################################
###
#
# snmpd.conf
#
# - created by the snmpconf configuration program
#
########################################################################
###
# SECTION: System Information Setup
#
# This section defines some of the information reported in
# the "system" mib group in the mibII tree.
# syslocation: The [typically physical] location of the system.
# Note that setting this value here means that when trying to
# perform an snmp SET operation to the sysLocation.0 variable will
make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: location_string
syslocation Cambridge
# syscontact: The contact information for the administrator
# Note that setting this value here means that when trying to
# perform an snmp SET operation to the sysContact.0 variable will make
# the agent return the "notWritable" error code. IE, including
# this token in the snmpd.conf file will disable write access to
# the variable.
# arguments: contact_string
syscontact "contact administrator"
########################################################################
###
# SECTION: Access Control Setup
#
# This section defines who is allowed to talk to your running
# snmp agent.
# rwuser: a SNMPv3 read-write user
# arguments: user [noauth|auth|priv] [restriction_oid]
rwuser auth
# rouser: a SNMPv3 read-only user
# arguments: user [noauth|auth|priv] [restriction_oid]
#rouser
# rocommunity: a SNMPv1/SNMPv2c read-only access community name
# arguments: community [default|hostname|network/bits] [oid]
rocommunity whatever
# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
# arguments: community [default|hostname|network/bits] [oid]
rwcommunity private
########################################################################
###
# SECTION: Trap Destinations
#
# Here we define who the agent will send traps to.
# trapsink: A SNMPv1 trap receiver
# arguments: host [community] [portnum]
#trapsink 10.4.5.178 public
# trap2sink: A SNMPv2c trap receiver
# arguments: host [community] [portnum]
trap2sink 168.159.121.153 public
# informsink: A SNMPv2c inform (acknowledged trap) receiver
# arguments: host [community] [portnum]
#informsink 10.4.10.94 public 162
# trapcommunity: Default trap sink community to use
# arguments: community-string
trapcommunity public
# authtrapenable: Should we send traps when authentication failures
occur
# arguments: 1 | 2 (1 = yes, 2 = no)
authtrapenable 2
------------------------------------------------------------------------
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
