I would start by rolling your binaries on the same system you were
running, unless you can verify that the MD5 sum of all 5000k files on your
Linux boxes match, then you're playing with fire.
There has never been, in the history of GNU/Linux, two identical systems.
:)
Secondly, we're still not sure if the issue is:
1) IPv6 transport of SNMP data
2) Access to SNMP IPv6 MIBs.
I haven't looked at the V6 mibs; I'm just starting to dabble in V6.
~BAS
On Tue, 2 Dec 2008, Reza Salehi wrote:
I know it has been going many E-mails back and forth regarding the IPV6
support and I appreciate your help and support.However I couldn't get a
clear answer on this.
My question is : Does snmpd (5.2.1) agent support any IPV6'MIB implementation
if we compile it with the following flag:
--with-transport="UDPIPv6 TCPIPv6" --with-modules=mibII/ipv6" --enable-ipv6
If it does, could somebody please tell me which MIB's object?
Best Regards,
Reza
--- On Tue, 12/2/08, Reza Salehi <[EMAIL PROTECTED]> wrote:
From: Reza Salehi <[EMAIL PROTECTED]>
Subject: Re: IPV6 support
To: "Wes Hardaker" <[EMAIL PROTECTED]>
Cc: "Brian A. Seklecki" <[EMAIL PROTECTED]>, "SNMP FORUM"
<net-snmp-users@lists.sourceforge.net>
Date: Tuesday, December 2, 2008, 11:23 AM
I used the following flag:
--with-transport="UDPIPv6 TCPIPv6" --with-modules=mibII/ipv6" to
along with -- enable-ipv6
I cant still see any IPV6'MIB implementation.
I build snmpd on different machine and copy it over to my target machine to
test.
I only copy snmpd executable file ..Do I need to copy different
files(library,..) over ,as well?
I have 5.2 net-snmpd installed on my target machine.
Regards,
Reza
--- On Tue, 12/2/08, Wes Hardaker <[EMAIL PROTECTED]> wrote:
From: Wes Hardaker <[EMAIL PROTECTED]>
Subject: Re: IPV6 support
To: [EMAIL PROTECTED]
Cc:
"Wes Hardaker" <[EMAIL PROTECTED]>, "Brian A.
Seklecki" <[EMAIL PROTECTED]>, "SNMP FORUM"
<net-snmp-users@lists.sourceforge.net>
Date: Tuesday, December 2, 2008, 10:30 AM
On Tue, 2 Dec 2008 08:51:09 -0800 (PST), Reza Salehi
<[EMAIL PROTECTED]> said:
RS> Thanks Wes. So the question is which IPV6'MIBs has been implemented
RS> in part of snmpd when we configure it with --enable--ipv6??
Well, do realize that the --enable-ipv6 flag turns on the apps being
able to speak SNMP over IPv6.
to turn on mib implementations you need to use the --with-mib-modules
flag. In theory, though, it turns out that the table you want should be
in the mibII/ipv6 module (I was wrong).
--
Wes Hardaker
Sparta, Inc.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's
challenge
Build the coolest Linux based applications with Moblin SDK & win great
prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"Show me a young conservative and I'll show you someone with no heart.
Show me an old liberal and I'll show you someone with no brains."
~ Winston Churchill-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
