On 1/23/17, 8:24 AM, Jiri Benc wrote:
> On Mon, 23 Jan 2017 08:13:30 -0800, Roopa Prabhu wrote:
>> And, a 'vlan-to-tunid' mapping is a very common configuration in L2 ethernet
>> vpn configurations.
> You have one particular and narrow use case in mind and are proposing a
> rather large patchset to add support for that (and only that) single
> use case, while we already have a generic mechanism in place to address
> this and many similar (and dissimilar, too) use cases. That doesn't
> sound right.
Let me clarify:
the generic mechanism you are talking about is dst_metadata infra. Any
subsystem can use it.
tc vlan and dst_metadata wrapper/filter provide a creative way to use it inside
the tc subsystem and is very
useful for people using tc all-around.
What I am proposing here is hooks in bridge to use the dst_metadata for pure L2
networks who
use the bridge driver. This is similar to how we have lwt plugged into the L3
(routing) code.
If you are using the bridge driver for vlan config and filtering, I don't see
why one
has to duplicate vlan config using tc. Its painful trying to deploy l2
networks with vlan config spanning
multiple subsystems and apis.
Regarding the patch-set size, let me give you a breakdown:
If i used tc for passing dst_metadata (assume 4k vlans that are participating
in l2 ethernet vpn):
(a) configure bridging/vlan filtering using bridge driver (4k vlans)
(b) configure tc rules to map vlans to tunnel-id (Additional patch to tc to
only allow tunnel-id in dst_metadata: ingress + egress = 8k tc rules)
(c) vxlan driver patch to make it bridge friendly (my patch in this series is
required regardless if i use tc or bridge driver for dst_metadata because vxlan
driver learns and needs to carry the forwarding information database)
(d) ethernet vpn controller (quagga bgp) looks at 'bridge api + vxlan api + tc
filtering rules'
My current series:
(a) configure bridging/vlan filtering using bridge driver (4k vlans with tunnel
info)
(b) vxlan driver patch to make it bridge friendly (my patch in this series is
required regardless if
i use tc or bridge driver for dst_metadata because vxlan driver learns and
needs to carry the forwarding information database)
(c) ethernet vpn controller (quagga bgp) looks at 'bridge api + vxlan api'
And btw, most of the functions that i am adding in the bridge driver are
related to vlan range handling.
vlan ranges code is tricky and i am trying to also support vlan-tunnelid
mapping in ranges, and i have tried
to rewrite my own vlan range code (added long back) to include tunnel info. The
rest is just use of the dst_metadata infra
to store and use dst_metadata per vlan.
>
> If the current generic mechanisms have bottlenecks for your use case,
> let's work on removing those bottlenecks. That way, everybody benefits,
> not just a single use case.
For people using all tc, the tc wrapper for dst_metadata is a good fit.
I see my series as still using the generic 'dst_metadata' mechanism/infra for a
newer use case.
like i say above, I see this similar to how we have plugged dst_metadata into
the L3 (routing) code.
This does it in the bridging code (for L2 networks).
Thanks,
Roopa
