Re: basic firewall question

[Daniel El�as Robles]

Then try ntop, and you should get something similar to what you want. At least based on tranfers.   www.ntop.org     Daniel ----- Original Message ----- From: [EMAIL PROTECTED] To: Daniel El�as Robles Sent: Saturday, March 30, 2002 7:37 PM Subject: Re: basic firewall question no, the boxes don't have snmp on. I don't think I have that option. I do use mrtg for the router, but I want to log the usage per IP basis. And even if the router had the aoption of doing that for me I have no access to it.   Thanks ----- Original Message ----- From: Daniel El�as Robles To: [EMAIL PROTECTED] Cc: Netfilter Sent: Saturday, March 30, 2002 5:07 PM Subject: Re: basic firewall question Does the have snmp activated?   If so, just use mrtg.   http://people.ee.ethz.ch/~oetiker/webtools/mrtg/     Daniel ----- Original Message ----- From: [EMAIL PROTECTED] To: Daniel El�as Robles Cc: Netfilter Sent: Saturday, March 30, 2002 7:05 PM Subject: Re: basic firewall question I want to monitor bandwidth with out disrupting the current network setup. I have a class C network and no control of the router.   I been looking around, and I think that a bridge may be able to do it. the hardest thing so far, is finding out what I actually need, so I can look for it.   Thanks ----- Original Message ----- From: Daniel El�as Robles To: [EMAIL PROTECTED] Cc: Netfilter Sent: Friday, March 29, 2002 10:42 PM Subject: Re: basic firewall question What are you trying to acomplish ?     Daniel ----- Original Message ----- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, March 29, 2002 4:44 PM Subject: basic firewall question Hello Netfiler,   Can I have a firewall with the 2 nic cards on the same network. I have this set up.   <Router 192.168.1.0/24> ----- <switch>------<servers 192.168.1.0/24>   I want   <Router 192.168.1.0/24> ----- <192.168.1.0/24(eth0) FW 192.168.1.0/24(eth1)>------<switch>------<servers 192.168.1.0/24>   Is it possible?   Thanks