Thanks for your reply Paul. It was more reply than I had hoped for ;-). I
have added TCP outbound port range 1024-65535 as subsequent connection for
the 1720 protocol I added earlier. However still no audio and video.
I also added this same TCP portrange inbound, also as subsequent connection
of the 1720 protocol, however i'm not online for the outer world. Am I
misinterpreting your suggestions, or could something else be wrong?
Regards, Michiel
>From: Paul Eftis <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: "'[EMAIL PROTECTED]'"
><[EMAIL PROTECTED]>
>Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
>Date: Wed, 18 Aug 1999 14:36:28 -0400
>
>You also have to open TCP ports 1024-65535 Outbound (Dynamic) for the
>negotiated H.323 Call Control (done as part of the negotiation over port
>1720). Although I have seen many concerned thoughts about this aspect of
>H.323, that it is a "huge security hole", it is not really an issue the way
>you have it setup (which is the way I recommend) since the ports are only
>opened for calls/packets initiated from within the network, which does not
>open you up to external packets being passed into the network (i.e. you
>have it setup with reflexive access control).
>
>I would like to also add a second point concerning the H.323 security
>issue:
>Even if you opened up TCP ports 1024-65535 Inbound to receive inbound NM
>calls,
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
