Winsock 2 must be disabled for NetMeeting at the
client -http://support.microsoft.com/support/kb/articles/q194/7/97.asp has
info on that -- the proxy FAQ has that info as well I think.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Paul Eftis
> Sent: Monday, August 23, 1999 10:58 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [NetMeeting] MS proxy server settings for Netmeeting
>
>
>
> Brian....it sounds like he has already configured it
> correctly....ever seen
> this before....is there something obvious I am missing here???
>
> Paul Eftis
>
> -----Original Message-----
> From: Brian Sullivan <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> <[EMAIL PROTECTED]>
> Date: Monday, August 23, 1999 12:27 PM
> Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
>
>
> >
> >http://proxyfaq.networkgods.com/downloads.htm has information on
> configuring
> >MSProxy 2 ( and has a section on NetMeeting configuration).
> >
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED]]On Behalf Of
> Michiel van
> >> der Linden
> >> Sent: Monday, August 23, 1999 7:22 AM
> >> To: [EMAIL PROTECTED]
> >> Subject: Re: [NetMeeting] MS proxy server settings for Netmeeting
> >>
> >>
> >>
> >> I'm not sure what you mean by "opened": I have added subsequent
> >> connections
> >> for UDP, port range 0-65535 for all protocols concerning
> >> Netmeeting, is that
> >> what you mean?
> >>
> >> >
> >> >Do have the UDP ports opened?? That would be my only other
> >> thought on the
> >> >issue. If yes, then a step by step would have to be
> >> done......i.e. can we
> >> >establish an outbound connection on TCP port whatever....(telnet
> >> is a handy
> >> >cheap and dirty tool to do this type of testing)
> >> >
> >> >Paul Eftis
> >> >
> >> >-----Original Message-----
> >> >From: Michiel van der Linden <[EMAIL PROTECTED]>
> >> >To: [EMAIL PROTECTED]
> >> ><[EMAIL PROTECTED]>
> >> >Date: Friday, August 20, 1999 7:50 AM
> >> >Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
> >> >
> >> >
> >> > >
> >> > >Thanks for your reply Paul. It was more reply than I had hoped
> >> for ;-). I
> >> > >have added TCP outbound port range 1024-65535 as subsequent
> connection
> >> >for
> >> > >the 1720 protocol I added earlier. However still no audio and video.
> >> > >
> >> > >I also added this same TCP portrange inbound, also as subsequent
> >> >connection
> >> > >of the 1720 protocol, however i'm not online for the outer
> world. Am I
> >> > >misinterpreting your suggestions, or could something else be wrong?
> >> > >
> >> > >Regards, Michiel
> >> > >
> >> > >
> >> > >
> >> > >>From: Paul Eftis <[EMAIL PROTECTED]>
> >> > >>Reply-To: [EMAIL PROTECTED]
> >> > >>To: "'[EMAIL PROTECTED]'"
> >> > >><[EMAIL PROTECTED]>
> >> > >>Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
> >> > >>Date: Wed, 18 Aug 1999 14:36:28 -0400
> >> > >>
> >> > >>You also have to open TCP ports 1024-65535 Outbound
> (Dynamic) for the
> >> > >>negotiated H.323 Call Control (done as part of the
> >> negotiation over port
> >> > >>1720). Although I have seen many concerned thoughts about
> >> this aspect
> >> >of
> >> > >>H.323, that it is a "huge security hole", it is not really an
> >> issue the
> >> >way
> >> > >>you have it setup (which is the way I recommend) since the
> ports are
> >> >only
> >> > >>opened for calls/packets initiated from within the network,
> >> which does
> >> >not
> >> > >>open you up to external packets being passed into the network
> >> (i.e. you
> >> > >>have it setup with reflexive access control).
> >> > >>
> >> > >>I would like to also add a second point concerning the
> H.323 security
> >> > >>issue:
> >> > >>Even if you opened up TCP ports 1024-65535 Inbound to receive
> >> inbound NM
> >> > >>calls,
> >> > >
> >> > >
> >> > >______________________________________________________
> >> > >Get Your Private, Free Email at http://www.hotmail.com
> >> >
> >-----------------------------------------------------------------------
> >> > >http://www.meetingbywire.com/Mailinglist.htm for unsubscribe
> >> information
> >> >
> >-----------------------------------------------------------------------
> >> >
> >>
> >-----------------------------------------------------------------------
> >> >http://www.meetingbywire.com/Mailinglist.htm for unsubscribe
> information
> >>
> >-----------------------------------------------------------------------
> >> >
> >>
> >>
> >> ______________________________________________________
> >> Get Your Private, Free Email at http://www.hotmail.com
> >> -----------------------------------------------------------------------
> >> http://www.meetingbywire.com/Mailinglist.htm for unsubscribe
> information
> >> -----------------------------------------------------------------------
> >>
> >>
> >
> >-----------------------------------------------------------------------
> >http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
> >-----------------------------------------------------------------------
>
> -----------------------------------------------------------------------
> http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
> -----------------------------------------------------------------------
>
>
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
