Brian....it sounds like he has already configured it correctly....ever seen
this before....is there something obvious I am missing here???
Paul Eftis
-----Original Message-----
From: Brian Sullivan <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
<[EMAIL PROTECTED]>
Date: Monday, August 23, 1999 12:27 PM
Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
>
>http://proxyfaq.networkgods.com/downloads.htm has information on
configuring
>MSProxy 2 ( and has a section on NetMeeting configuration).
>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]On Behalf Of Michiel van
>> der Linden
>> Sent: Monday, August 23, 1999 7:22 AM
>> To: [EMAIL PROTECTED]
>> Subject: Re: [NetMeeting] MS proxy server settings for Netmeeting
>>
>>
>>
>> I'm not sure what you mean by "opened": I have added subsequent
>> connections
>> for UDP, port range 0-65535 for all protocols concerning
>> Netmeeting, is that
>> what you mean?
>>
>> >
>> >Do have the UDP ports opened?? That would be my only other
>> thought on the
>> >issue. If yes, then a step by step would have to be
>> done......i.e. can we
>> >establish an outbound connection on TCP port whatever....(telnet
>> is a handy
>> >cheap and dirty tool to do this type of testing)
>> >
>> >Paul Eftis
>> >
>> >-----Original Message-----
>> >From: Michiel van der Linden <[EMAIL PROTECTED]>
>> >To: [EMAIL PROTECTED]
>> ><[EMAIL PROTECTED]>
>> >Date: Friday, August 20, 1999 7:50 AM
>> >Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
>> >
>> >
>> > >
>> > >Thanks for your reply Paul. It was more reply than I had hoped
>> for ;-). I
>> > >have added TCP outbound port range 1024-65535 as subsequent connection
>> >for
>> > >the 1720 protocol I added earlier. However still no audio and video.
>> > >
>> > >I also added this same TCP portrange inbound, also as subsequent
>> >connection
>> > >of the 1720 protocol, however i'm not online for the outer world. Am I
>> > >misinterpreting your suggestions, or could something else be wrong?
>> > >
>> > >Regards, Michiel
>> > >
>> > >
>> > >
>> > >>From: Paul Eftis <[EMAIL PROTECTED]>
>> > >>Reply-To: [EMAIL PROTECTED]
>> > >>To: "'[EMAIL PROTECTED]'"
>> > >><[EMAIL PROTECTED]>
>> > >>Subject: RE: [NetMeeting] MS proxy server settings for Netmeeting
>> > >>Date: Wed, 18 Aug 1999 14:36:28 -0400
>> > >>
>> > >>You also have to open TCP ports 1024-65535 Outbound (Dynamic) for the
>> > >>negotiated H.323 Call Control (done as part of the
>> negotiation over port
>> > >>1720). Although I have seen many concerned thoughts about
>> this aspect
>> >of
>> > >>H.323, that it is a "huge security hole", it is not really an
>> issue the
>> >way
>> > >>you have it setup (which is the way I recommend) since the ports are
>> >only
>> > >>opened for calls/packets initiated from within the network,
>> which does
>> >not
>> > >>open you up to external packets being passed into the network
>> (i.e. you
>> > >>have it setup with reflexive access control).
>> > >>
>> > >>I would like to also add a second point concerning the H.323 security
>> > >>issue:
>> > >>Even if you opened up TCP ports 1024-65535 Inbound to receive
>> inbound NM
>> > >>calls,
>> > >
>> > >
>> > >______________________________________________________
>> > >Get Your Private, Free Email at http://www.hotmail.com
>> >
>-----------------------------------------------------------------------
>> > >http://www.meetingbywire.com/Mailinglist.htm for unsubscribe
>> information
>> >
>-----------------------------------------------------------------------
>> >
>> >-----------------------------------------------------------------------
>> >http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
>> >-----------------------------------------------------------------------
>> >
>>
>>
>> ______________________________________________________
>> Get Your Private, Free Email at http://www.hotmail.com
>> -----------------------------------------------------------------------
>> http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
>> -----------------------------------------------------------------------
>>
>>
>
>-----------------------------------------------------------------------
>http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
>-----------------------------------------------------------------------
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
