----- Message d'origine -----
De : Brian Sullivan <[EMAIL PROTECTED]>
� : <[EMAIL PROTECTED]>
Envoy� : samedi 20 novembre 1999 14:28
Objet : RE: [NetMeeting] ports
>
> --------------------
> --->eCollaboration tells that ports 1503, 1720, 1731 are not open.
> --->My IP address
> --->is 195.132.230.23. The cable modem is a Motorola CyberSurfer
> --->connected to
> --->the tv outlet and to the Ethernet card in the PC, no telephone
> --->connection
> --->with the modem. I had to reload NM2.11, which works well. The error
> --->displayed when connecting with somebody on NM3.01 was : ...page
failure
> --->...on 0000:776b9db5...(I translate from the french) and I was
> --->out NM with my
> --->Cam (Creative WebCam II on parallel port) disconnected. This error
never
> --->occurrs on NM2.11.
> --->Thanks for your assistance.
> --->Max Gay
>
> If Netmeeting 2.11 works but NetMeeting 3.x doesn't then it is likely not
a
> problem with routers or ports being blocked -- is possible that NM 3 was
set
> to secure or data only mode?
>
> -----------------------------------------------------------------------
> http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
> -----------------------------------------------------------------------
>
>
Second mail after loading NM3.01french, and testing eCollaboration, and
trying to contact someone on the ils list : I checked everything before
(security, etc..) and I have the same problem : error message about page
failure and disconnection of the cam...and closing of NM. Despairing.
Max Gay
-----------------------------------------------------------------------
http://www.meetingbywire.com/Mailinglist.htm for unsubscribe information
-----------------------------------------------------------------------
