Hi Kent,

Here is my attempt at word smithing section 3:

The old D and E have been merged together (now labelled as C). A new D has been added to try and define transactional error handling semantics without introducing the term transactional.


   3.  Support for both synchronous and asynchronous configuration
       operations

       A. A server may choose to support only synchronous configuration
          operations, or only asynchronous configuration operations, or
          both synchronous and asynchronous configuration operations in
          a client specified per-operation basis.

       B. Support for synchronous operations as per the definition of
          "synchronous configuration operation".

       C. Support for asynchronous operations as per the definition of
          "asynchronous configuration operation".  Servers that support
          asynchronous configuration operations MAY also provide a
          verify operation that a client can request from the server to
          return information regarding the difference between the
          intended and applied configurations.

       D. Support for best effort and rollback-on-error error handling
          semantics.  The configuration protocol, or default server
          behavior, MUST specify whether the configuration is applied
          in a best effort fashion, or using "rollback on error"
          semantics - where all configuration changes in the request are
          undone if processing of any part of the configuration update
          failed.  A configuration protocol, or server, SHOULD provide
          support for rollback-on-error behavior and MAY choose to
          provide support for best effort semantics as well.

Any comments?

Thanks,
Rob


On 15/10/2015 18:32, Kent Watsen wrote:
Again, with better formatting for the list:

    3.  Support for both synchronous and asynchronous configuration
        operations (see terms)

        A. A server may only support synchronous configuration
           operations, or may only support asynchronous configuration
           operations, or may support synchronicity to be client
           specified on a per-operation basis.


        C. Support for synchronous configuration operations
           requires the server to block sending a response to
           the client until it is able to able to determine whether
           there are any errors in the request or errors from
           applying the configuration change.
D. Support for asynchronous configuration operations
           requires the server to send a response to the client
           immediately indicated that the request was accepted
           and send a notification to the client when the intended
           config is fully effective or there are any errors from
           applying the configuration change.

        E. Support for asynchronous configuration operations MAY
           also provide a verify operation which a client can request
           from the server to obtain information regarding the
           difference between the intended and applied configurations.


Kent



On 10/15/15, 1:22 PM, "Kent Watsen" <kwat...@juniper.net> wrote:

Requirement #3 was discussed on today's call.   We agreed to remove the
words "distributed" and "transactional" and to reword it in terms of
"configuration operations".  The resulting text follows:


   3.  Support for both synchronous and asynchronous configuration
operations (see terms)

       A. A server may only support synchronous configuration operations,
or may only support
          asynchronous configuration operations, or may support
synchronicity to be client
          specified on a per-operation basis.


       C. Support for synchronous configuration operations requires the
server to block
          sending a response to the client until it is able to able to
determine whether
          there are any errors in the request or errors from applying the
configuration
          change.
D. Support for asynchronous configuration operations requires the
server to send
          a response to the client immediately indicated that the request
was accepted
          and send a notification to the client when the intended config
is fully
          effective or there are any errors from applying the
configuration change.

       E. Support for asynchronous configuration operations MAY also
provide a verify
          operation which a client can request from the server to obtain
information
          regarding the difference between the intended and applied
configurations.



We have consensus on the above, but wanted to rewrite it relying more on
the terms from the Terminology section, and also potentially merge E into
D.

Anybody want to take a stab at it?

Thanks,
Kent



On 10/14/15, 8:00 PM, "Nadeau Thomas" <tnad...@lucidvision.com> wrote:

On Oct 14, 2015:7:51 PM, at 7:51 PM, Kent Watsen <kwat...@juniper.net>
wrote:



On 9/28/15, 1:40 AM, "Juergen Schoenwaelder"
<j.schoenwael...@jacobs-university.de> wrote:

On Wed, Sep 23, 2015 at 03:03:57PM +0000, Kent Watsen wrote:
Popping the stack on this issue, the issue remains as to what to do
with requirement 3:

   3.  Support for both transactional, synchronous management systems
        as well as distributed, asynchronous management systems

I fail to understand 'transactional' and 'distributed' here.
I hope that these terms will be clarified on tomorrow's call.   There
is
also a chance that these terms will be removed from the text
altogether,
as they may be viewed as unnecessarily qualify the
synchronous/asynchronous terms.


And
frankly, I am not sure why the management _systems_ are classified to
be synchronous or asynchronous - I think we are talking about
protocols between a management system and a device.

Aye, I didn't see that before.

First off, elsewhere in the draft the term "system" is used 7 times to
refer to the device (e.g., NC/RC server).  The term "system" is
otherwise
not defined.

But to your main point, we have been discussing the terms a/synchronous
to
have to do with internal server processing of an edit request, but in
'3'
the terms are being used to qualify a management system, which can't be
right.  I think that '3' should be rewritten to be a statement about
devices, not a statement about management systems.
        It might be better to frame this in terms of a client and a
server.

        ‹Tom


Anyway, I am not sure 3. is properly worded until someone defines
'transactional', 'distributed', 'synchronous management systems' and
'asynchronous management systems'.
The agenda for tomorrow's interim!  :)


Kent

_______________________________________________
netmod mailing list
netmod@ietf.org
https://www.ietf.org/mailman/listinfo/netmod
_______________________________________________
netmod mailing list
netmod@ietf.org
https://www.ietf.org/mailman/listinfo/netmod
_______________________________________________
netmod mailing list
netmod@ietf.org
https://www.ietf.org/mailman/listinfo/netmod

_______________________________________________
netmod mailing list
netmod@ietf.org
https://www.ietf.org/mailman/listinfo/netmod

Reply via email to