Hello,
I am testing my GLDV2 driver "qla". The OS is Nevada 76 and my qla driver works
fine however, VLAN does not. I can not set it up at all, but, VLAN can be setup
on bge driver. I do not know why?
# uname -a
SunOS sparc1 5.11 snv_76 sun4u sparc SUNW,Sun-Fire-V215
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu 1500
index 2
inet 10.3.20.123 netmask ffffff00 broadcast 10.3.20.255
ether 0:14:4f:7a:b2:20
bge3000: flags=201000842<BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 0.0.0.0 netmask 0
ether 0:14:4f:7a:b2:20
qla0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 192.168.0.50 netmask ffffff00 broadcast 192.168.0.255
ether 0:c0:dd:8:e7:d
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
bge0: flags=202004841<UP,RUNNING,MULTICAST,DHCP,IPv6,CoS> mtu 1500 index 2
inet6 fe80::214:4fff:fe7a:b220/10
ether 0:14:4f:7a:b2:20
qla0: flags=202004841<UP,RUNNING,MULTICAST,DHCP,IPv6,CoS> mtu 1500 index 3
inet6 fe80::2c0:ddff:fe08:e70d/10
ether 0:c0:dd:8:e7:d
# dladm show-link
qla0 type: legacy mtu: 1500 device: qla0
qla1 type: legacy mtu: 1500 device: qla1
bge0 type: non-vlan mtu: 1500 device: bge0
bge3000 type: vlan 3 mtu: 1500 device: bge0
bge1 type: non-vlan mtu: 1500 device: bge1
bge2 type: non-vlan mtu: 1500 device: bge2
bge3 type: non-vlan mtu: 1500 device: bge3
# ifconfig qla3000 plumb
ifconfig: SIOCSLIFNAME for ip: qla3000: no such interface
Tom
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
