Thanks. I already have those two lines :
tx_hcksum_enable=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0; lso_enable=0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0; The only thing that was working was to use version 5.2.8 of the e1000g driver. But with build 105, this is not possible anymore :-( the system panic and the first lines of the command " strings unix.0 | head -50 " are the ones below : .symtab .strtab .shstrtab _END_ _START_ __return_from_main __unsupported_cpu have_cpuid cpu_486 port_22_free restore_IMR restore_PIC cpu_vendor vendor_is_cyrix cpu_done is486 isa486 maybeGX maybe6x86L likely6x86 coma_bug maybeM2 maybeMediaGX maybeGXm media_gx maybeM3 cyrix6x86MX likeMII likelyM3 dtrace_badflags dtrace_badtrap _lwp_rtt freq_tsc_loop freq_tsc_perf_loop freq_tsc_increase_count freq_tsc_pit_did_not_wrap freq_tsc_too_fast freq_tsc_sufficient_duration freq_tsc_calculate freq_tsc_div_safe freq_tsc_end freq_notsc_loop freq_notsc_perf_loop freq_notsc_increase_count freq_notsc_pit_did_not_wrap freq_notsc_too_fast freq_notsc_sufficient_duration freq_notsc_calculate freq_notsc_div_safe freq_notsc_notcyrix What I'll do is to force in e1000g.conf @ 1000fdx instead of letting the device negotiate and see but it's time consuming. I'm already taking care of 450 solaris server during the day :-) I don't have much time at home :-) Best regards, -- This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
