Thank you very much . I tried two clients with IOMeter , and change the policy from L4 to L3,L4 .It looks very nice.The read performance is good .
[b]But the write(8k/32 in IOmeter) performance did not increase,the bandwidth still is the same with a single e1000g card . one client is 50 Mb/s the other is only 60Mb/s too. If it run correct it both should be over 90Mb/s .[/b] what's the matter? I would hope that two streams will go faster, though. r...@opensolaris:~# dladm show-aggr LINK POLICY ADDRPOLICY LACPACTIVITY LACPTIMER FLAGS aggr1 L3,L4 auto off short ----- r...@opensolaris:~# dladm show-aggr -s -i 4 LINK PORT IPACKETS RBYTES OPACKETS OBYTES IPKTDIST OPKTDIST aggr1 -- 178311 211224084 421066 481581366 -- -- -- e1000g0 148504 174342924 323589 461207855 83.3 76.8 -- e1000g1 29807 36881160 97477 20373511 16.7 23.2 aggr1 -- 152755 180057562 331059 370303397 -- -- -- e1000g0 113624 128032580 249968 353636849 74.4 75.5 -- e1000g1 39131 52024982 81091 16666548 25.6 24.5 -- This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
