No, I meant to say it didn't respond to the crtl A Z.
Will
----- Original Message -----
From: Dan Brown <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, May 20, 1999 1:01 PM
Subject: Re: [newbie] hey guys
> Dan Brown wrote:
> > Pliler Main Unit wrote:
>
> > > BTW dan, that minicom, got me into trouble, it
> > > did respond to the cntl A Z command, and I didn't know
> > > how to get out of it, so had to hit the C-A-Del keys.
>
> It responded to Ctrl-A Z? Good, then it should have brought up a
> menu. Near the bottom of that menu, it says "Select function or press
> Enter for none.", which means just what it says--choose what you want to
> do, or press Enter to get back to the main screen. From that screen,
> you should hit O to bring up the configuration menu; from that menu,
> select Serial Port Setup. In that screen, you need to set the port to
> /dev/ttyS1 or /dev/cua1 (try the tty device first; if it doesn't work,
> try the cua device).
>
> Once you've set the serial port properly, hit Esc a couple of
times to
> return to the main screen. There, type "AT" (without the quotes) and
> press Enter. The modem should respond OK. If so, that tells you that
> the port and modem are functioning properly.
>
> --
> Dan Brown, KE6MKS, [EMAIL PROTECTED]
> "Since all the world is but a story, it were well for thee to buy the
> more enduring story rather than the story that is less enduring"
> -- The Judgment of St. Colum Cille
