Reinstall's probably the best bet, but try restoreing your registry and
then booting safemode, scanreg reg something don't remeber the exe off
hand but u run it from a command prompt and can restore/backup upto 5
registrys with the default setup (theres a config to set it whatever u
want but i don't remeber that either). This is pretty common when
changeing the mainboard, before hand (like it helps now, but) you can
save the hardware config do so, now delete all the things in the section
w/ the bus's isa/pci, once those are removed delete any other hardware
that isn't staying also. When it boot's up it'll will complain that it
can't determine the current configuration, select the striped down version
and it should autodetect the new board.
On Sat, 3 Jul 1999, Steve Winston wrote:
>
> Reinstall is what I am looking at after hours poring over Win95 texts.
> Since Friday, I have installed a new mommaboard, cpu and RAM and sound
> card. Save for the soundcard, Linux has been no trouble. Win95 has been
> nothing but a pain in the butt (each OS is on its own hd on one
> computer).
> Alan, I still can't get the snd card to work.
> I uninstalled the old sox and sndconfig rpms. But some junk was left in
> various files. Do I need to go through the system and delete
> everything?
> Once I downloaded the new rpms, I typed:
> rpm -ivh <complete rpm filename>
> Is that sufficient. I know that it opened the rpm, but when I used -ql,
> it said the files weren't installed. Is there another step?
> thanks, Steve W
> --- Alan Shoemaker <[EMAIL PROTECTED]> wrote:
> > Steve....nope, I've no idea. When my Win98 boot got
> > screwed up it wouldn't
> > even start to boot and I ended up re-installing
> > Windows (yuck). Maybe
> > someone else can help on this one.
> >
> > Alan
> >
> > ----- Original Message -----
> > From: Steve Winston <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Saturday, July 03, 1999 12:27 PM
> > Subject: Re: [newbie] SoundBlaster 16 horrors!! HElp
> >
> >
> > > Hy alan, thanks for the help. I will try it. I
> > have one more question
> > > which is not appropriate for the list, however.
> > Linux is on one hard
> > > drive, and win95 is on the other. Suddenly, win95
> > won't complete
> > > booting. It says "windows protection error" and
> > says it can initialize
> > > IOS, whatever that is. It won't even boot in safe
> > mode. Any ideas?
> > > thanks much , steve w.
> > >
> > > --- Alan Shoemaker <[EMAIL PROTECTED]> wrote:
> > > > Hi....what worked for my PCI128 card (which
> > returned
> > > > the same error message
> > > > as the one below did) was this:
> > > >
> > > > 1) uninstall the current sox & sndconfig rpm's.
> > > > 2) install the new sox rpm from the updates
> > > > 3) install the new sndconfig rpm from the below
> > > > link.
> > > >
> > > >
> > >
> >
> ftp://jumpstart.netpirate.org/pub/mdk-test/sndconfig-0.33-3mdk.i586.rpm
> > > >
> > > > 4) run sndconfig and install your card.
> > > >
> > > > I sure hope this helps.
> > > >
> > > > Alan
> > > >
> > > > ----- Original Message -----
> > > > From: YH <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Saturday, July 03, 1999 4:47 AM
> > > > Subject: Re: [newbie] SoundBlaster 16 horrors!!
> > HElp
> > > >
> > > >
> > > > > > When I try sndconfig to set up my
> > SoundBlaster
> > > > 16 PCI card, I am told
> > > > > > it can't be found. I get a message:
> > > > > > "modprob error:
> > > > > > /lib/modules/2.2.9-19mdk/misc/sb.o:
> > > > > > init-module: Device or Resource busy
> > > > > > sound: Device or resource busy"
> > > > >
> > > > > Sound Blaster 16 PCI is *NOT* the same as
> > Sound
> > > > Blaster 16.
> > > > >
> > > > > However, since the Sound Blaster 16 PCI is
> > using
> > > > the ES1373 chipset, it
> > > > should
> > > > > work with the same drivers as Ensoniq
> > AudioPCI,
> > > > Sound Blaster PCI 64 and
> > > > > Sound Blaster 128.
> > > > >
> > > > > Unfortunately, I do not have any idea where to
> > > > obtain these drivers.
> > > > >
> > > > > --
> > > > > Yusry Harfuddin [[EMAIL PROTECTED]]
> > > > >
> > > >
> > > >
> > >
> > >
> > _________________________________________________________
> > > Do You Yahoo!?
> > > Get your free @yahoo.com address at
> > http://mail.yahoo.com
> > >
> >
> >
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
