I did a fresh install of Mandrake 9.0 and have not been able to get the
removable media to work. I bought a new cdrom drive and have re-seated
the cables numerous times. I disabled the supermount using the command
"supermount -i disable" in a root terminal mode. I have attached my
dmesg output and my fstab file.
I have a 800 duron, 500 mb ram, sony cdrom , Toshiba DVD-rom and a scsi
cd burner I move between systems. I have a GA-71XEH mother brd. I have
hooked the two hd drives on channel 1 and the cdrom dvdrom on channel 2.
Before I ran the disable supermount I had all sorts of funky icons for
the removable drives and after I ran it the icons look right but it
always acts as if there is nothing in the drives. I have tried various
cd's in both the cdrom and dvd drives to no avail.
I have tried everything I know of but no joy. Any help will be vary much
appreciated.
Roly
--
"The box said to install windows 2000 or better!"
So I installed Linux!!
Linux Counter #241069
/dev/hda1 / ext3 defaults 1 1
none /dev/pts devpts mode=0620 0 0
/dev/hda3 /home ext3 defaults 1 2
/dev/hdc /mnt/cdrom auto
codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,umask=0,user,nodev 0 0
/dev/hdd /mnt/cdrom2 auto
codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,umask=0,user,nodev 0 0
/dev/scd0 /mnt/cdrom3 auto
codepage=850,iocharset=iso8859-1,noauto,nosuid,ro,umask=0,user,nodev 0 0
/dev/fd0 /mnt/floppy auto
iocharset=iso8859-1,codepage=850,sync,unhide,noauto,nosuid,umask=0,user,nodev 0 0
/dev/hdb1 /mnt/windows ext2 defaults 1 2
none /proc proc defaults 0 0
/dev/hdb5 /var/www ext2 defaults 1 2
/dev/hda5 swap swap defaults 0 0
[roly@localhost roly]$ dmesg
Linux version 2.4.19-16mdk ([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake
Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=301 devfs=mount quiet mem=nopentium
hdc=ide-scsi
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 807.966 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1612.18 BogoMIPS
Memory: 515380k/524224k available (1176k kernel code, 8456k reserved, 444k data, 136k
init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 807.9973 MHz.
..... host bus clock speed is 201.9993 MHz.
cpu: 0, clocks: 2019993, slice: 1009996
CPU0<T0:2019984,T1:1009984,D:4,S:1009996,C:2019993>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router AMD756 VIPER [1022/740b] at 00:07.3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd8000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:b139
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller on PCI bus 00 dev 39
AMD7409: chipset revision 7
AMD7409: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS40.0, ATA DISK drive
hdb: WDC AC313000R, ATA DISK drive
hdc: CDU5211, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=4866/255/63, UDMA(33)
hdb: 25429824 sectors (13020 MB) w/512KiB Cache, CHS=1582/255/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > p3
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 245k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
AMD756: dev 9004:8178, router pirq : 1 get irq : 10
PCI: Found IRQ 10 for device 00:08.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
AMD756: dev 1022:740c, router pirq : 4 get irq : 5
PCI: Found IRQ 5 for device 00:07.4
usb-ohci.c: USB OHCI at membase 0xe4970000, IRQ 5
usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-756 [Viper] USB
usb-ohci.c: AMD756 erratum 4 workaround
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Adding Swap: 401584k swap-space (priority -1)
hdd: ATAPI 48X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-ROM CDU5211 Rev: YYS7
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<[EMAIL PROTECTED]> and others
AMD756: dev 8086:1229, router pirq : 3 get irq : 9
PCI: Found IRQ 9 for device 00:0a.0
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:A0:C9:1A:53:A9, IRQ 9.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 352509-003, Physical connectors present: RJ45
Primary interface chip DP83840 PHY #1.
DP83840 specific setup, setting register 23 to 8462.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
AMD756: dev 1102:0002, router pirq : 2 get irq : 11
PCI: Found IRQ 11 for device 00:09.0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, Canon S450
lp0: using parport0 (polling).
Splash status on console 0 changed to off
inserting floppy driver for 2.4.19-16mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
spurious 8259A interrupt: IRQ7.
PPP BSD Compression module registered
PPP Deflate Compression module registered
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
