On Mon, 2003-09-08 at 11:25, Tom Brinkman wrote:
> On Sunday September 7 2003 11:09 pm, Anne Wilson wrote:
> > On Sunday 07 Sep 2003 6:13 pm, Tom Brinkman wrote:
> > > o  Any decent heatsink and fan will do, but use thermal grease,
> > >    not a thermal pad.  Provide plenty of air movement (ie, case
> > >    cooling).
> >
> > Often the thermal pad is already attached when you buy the
> > components. Is there a way of cleaning this off so that you can
> > use grease?  I've never dared try it.
> >
> > Anne
> 
>    Use a pancake flipper, specially the ones for coated pans. Be 
> careful not to gouge the heatsink base if it's copper (should be).  
> Clean off the residue with some rubbin alcohol, then apply a thin 
> layer of thermal grease to the cpu's die. The grease is only meant 
> to fill in the lows spots, the HS should sit firmly and squarely in 
> direct contact with the cpu. Anything but a thin layer (about the 
> thickness of a sheet of paper) will be sqeezed out anyhow.
> 
>     Most decent HS's now ship with grease, not pads. There's two big 
> problems with pads. They're not as heat transfer efficent as 
> grease, and they deteriorate fairly quickly. Often in just a few 
> months. The hotter the processor runs, the quicker the pads fail.

I hate to horn in on this Tom, but you made it too interesting. ;)

I would like to add that pads are one shots.  They are designed for one
mounting and one only; after that their efficiency is shot. 
Theoretically pads are supposed to have an advantage over grease, but
only if you never upgrade. (i.e., remove the heat sink and put it back
with the same pad)  Also much of the "efficiency advantage" is lost
comparatively speaking if you use a superior heat compound like Arctic
Silver 3, which is according to test results the best stuff on the
market right now.

I would also like to add that instead of alchohol, if you want to remove
hardened heat grease a better choice for softening and removal is
odorless mineral spirits with Q-tips.  I found it works better here,
probably because heat compound and mineral spirits are both petroleum
products.

One more suggestion I have, and I think it's the most important one,
wear your static wrist band secured to a valid earth ground while you
are inside the machine, so that you will keep your computer equipment in
mint condition.

LX
-- 
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Linux Mandrake 9.1      Kernel 2.4.21-0.13mdk
*Catch Star Trek Enterprise, Wednesdays on UPN*
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to