On Thursday 21 December 2000 11:50 pm, you wrote:
> On Thursday 21 December 2000 09:33 pm, you wrote:
> > First check your /etc/fstab to see if your CD-RW is mounted at boot.
> > Also, have you tried burning as root? By default, you can only burn in
> > root mode.
>
> Yes I have tried burning as root. The CD-RW works as a normal CD-Rom just
> fine.
> CD-RW is supermount in fstab
Here is the error I get from cdrecord. Pisses me off too cause it keeps
fixating the cd leaving it useless.
[root@localhost jon]# cdrecord -v dev=/dev/sgc speed=4 /home/track-01.iso
Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/sgc'
devname: '/dev/sgc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'IDE-CD '
Identifikation : 'R/RW 4x4x24 '
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1572864 = 1536 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 451 MB
Total size: 518 MB (51:20.64) = 231048 sectors
Lout start: 518 MB (51:22/48) = 231048 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11640 (97:26/60)
ATIP start of lead out: 337350 (75:00/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 337350 Blocks current: 337350 Blocks remaining: 106302
RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 117982
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 1 of 451 MB written (fifo 100%).cdrecord: Input/output error.
write_ g1: scsi
sendcmd: retryable error
CDB: 2A 00 00 00 03 E0 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 03 E0 13 00 00 00 00 63 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru
0x0
Sense flags: Blk 992 (valid)
write track data: error after 2031616 bytes
Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00
Writing time: 16.613s