Have a look at http://www.mandrakeuser.org/hardware/hremov3.html. Make sure
your drive's setup fits the CD-RW setup here.
On Fri, 22 Dec 2000 16:37, Jon Doe wrote:
> On Thursday 21 December 2000 11:50 pm, you wrote:
> > On Thursday 21 December 2000 09:33 pm, you wrote:
> > > First check your /etc/fstab to see if your CD-RW is mounted at boot.
> > > Also, have you tried burning as root? By default, you can only burn in
> > > root mode.
> >
> > Yes I have tried burning as root. The CD-RW works as a normal CD-Rom just
> > fine.
> > CD-RW is supermount in fstab
>
> Here is the error I get from cdrecord. Pisses me off too cause it keeps
> fixating the cd leaving it useless.
>
> [root@localhost jon]# cdrecord -v dev=/dev/sgc speed=4 /home/track-01.iso
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg
> Schilling TOC Type: 1 = CD-ROM
> scsidev: '/dev/sgc'
> devname: '/dev/sgc'
> scsibus: -2 target: -2 lun: -2
> Linux sg driver version: 2.1.39
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 1
> Vendor_info : 'IDE-CD '
> Identifikation : 'R/RW 4x4x24 '
> Revision : '1.04'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO
> Drive buf size : 1572864 = 1536 KB
> FIFO size : 4194304 = 4096 KB
> Track 01: data 451 MB
> Total size: 518 MB (51:20.64) = 231048 sectors
> Lout start: 518 MB (51:22/48) = 231048 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> Disk sub type: Medium Type C, low Beta category (C-) (6)
> ATIP start of lead in: -11640 (97:26/60)
> ATIP start of lead out: 337350 (75:00/00)
> Disk type: Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 3
> Manufacturer: CMC Magnetics Corporation
> Blocks total: 337350 Blocks current: 337350 Blocks remaining: 106302
> RBlocks total: 349030 RBlocks current: 349030 RBlocks remaining: 117982
> Starting to write CD/DVD at speed 4 in write mode for single session.
> Last chance to quit, starting real write in 1 seconds.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Starting new track at sector: 0
> Track 01: 1 of 451 MB written (fifo 100%).cdrecord: Input/output error.
> write_ g1: scsi
> sendcmd: retryable error
> CDB: 2A 00 00 00 03 E0 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: F0 00 05 00 00 03 E0 13 00 00 00 00 63 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x63 Qual 0x00 (end of user area encountered on this track) Fru
> 0x0
> Sense flags: Blk 992 (valid)
> write track data: error after 2031616 bytes
> Sense Bytes: 70 00 00 00 00 00 00 13 00 00 00 00 00 00 00 00 00 00
> Writing time: 16.613s
--
Sridhar Dhanapalan.
Your mouse has moved. Windows must be rebooted to acknowledge this change.
