On Tue, 26 Dec 2000, Ronald J. Hall wrote:
> Hi. Okay, my fiance' bought a Polaroid 640 PDC Plus camera for me for
> Christmas. I downloaded Gphoto, and I'm trying to get it to work. The camera
> takes pictures, I've got them stored on its memory stick. I hooked the serial
> cable from the camera to 1 of 2 external serial ports I have on my 'Nix box. I
> clicked on configure in Gphoto, and picked Polaroid PDC 640 (no plus model is
> listed but this is so close?). I picked the first serial port listed (ttyS0)
> which as reported by drakconf, turns out to be the one used by my internal ISA
> Diamond modem. So I picked ttys01, and ttyS02, etc, etc, everything that was
> listed in gphoto's drop down menu. Nothing has worked so far. When I pick
> camera, download index, it always says downloading index, then index done, but
> I have a gray screen in gphoto with no pictures. In my BIOS, my 2 onboard
> serial ports are set to AUTO. From dmesg, here is how my serial ports are
> listed:
>
> ttyS00 at 0x03f8 (irq = 4) is a 16550
> ttyS01 at 0x02f8 (irq = 3) ditto (apparently, this is my internal modem)
> ttyS02 at 0x03e8 (irq = 4) ditto
>
> So...how do I get my camera to work with Gphoto? Thanks! ;-)
>
>
Have you tried Camera -> Summary? That should tell you if the camera is
properly recognized. The information would include battery state and the
number of photos already taken.
--
Len Lawrence [EMAIL PROTECTED]
23 West Court www.tarazed.demon.co.uk
The Thistle Foundation
Edinburgh EH16 4EB 0131-661 3648